DigiTech BASS DRIVER Посібник - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник для Музична педаль DigiTech BASS DRIVER. DigiTech BASS DRIVER 12 сторінок. Bass overdrive/distortion

DigiTech BASS DRIVER Посібник
7. Pedal Release Pins
These two pins are spring-loaded hinges that hold the pedal in place.
Push these pins in to release the pedal from the chassis exposing the
battery compartment. (See battery replacement diagram.)
8. Pedal
Turns the effect on and off.
9. Out 1(Amp) Jack
Connect this output to your bass amplifier.

10. Indicator LED

Indicates when the effect is turned on. If the LED becomes dim or does
not light when the cables are connected, the battery needs to be
replaced.
11. Out 2 (Mixer) Jack
This output features DigiTech's CIT™ cabinet modeling technology, that
lets you run the pedal directly into a mixer or recorder input without
having to use a bass amplifier. The CIT model is based on a 4x10
cabinet.