Sony BRAVIA KD-43X8000G Довідковий посібник - Сторінка 8
Переглянути онлайн або завантажити pdf Довідковий посібник для ТЕЛЕБАЧЕННЯ Sony BRAVIA KD-43X8000G. Sony BRAVIA KD-43X8000G 16 сторінок.
Також для Sony BRAVIA KD-43X8000G: Посібник з налаштування (2 сторінок)
Друкувати сторінку
- 1. Table of Contents
- 1. Parts and Controls
- 1. Controls and Indicators
- 2. Safety Information
- 2. Using Remote Control
- 2. Remote Control Parts Description
- 3. Connection Diagram
- 4. Installing the TV to the Wall
- 4. Using the Optional Wall-Mount Bracket
- 4. Detaching the Table-Top Stand from the
- 5. Troubleshooting
- 5. Troubles and Solutions
- 6. Specifications
AUDIO OUT
• Supports 3-pole stereo mini jack only.
• To listen to the TV's sound through the
connected equipment, press HOME.
Select [Settings] t [Sound] t
[Headphone/Audio out] and then select
the desired item.
HDMI IN 1/2/3/4
• HDMI interface can transfer the digital
video and audio on a single cable.
• If the device has a DVI jack, connect it to
HDMI IN 1 through a DVI - HDMI adapter
interface (not supplied), and connect the
device's audio out jack to HDMI 1 AUDIO
2
IN.*
•
< 12 mm
< 21 mm
• HDMI IN 2/3
To enjoy high quality 4K 50p/60p
contents, connect a Premium High Speed
HDMI cable to the HDMI IN 2/3 and set the
[HDMI signal format] to [Enhanced
format].
For details of supported formats, refer to
the "Specifications" in this manual
(page 12-13).
• HDMI IN 3 ARC (Audio Return Channel)
Connect your audio system to the HDMI IN
3 to route TV audio to your audio system.
An audio system that supports HDMI ARC
can send video to the TV, and receive
audio from the TV via the same HDMI
cable. If your audio system does not
support HDMI ARC, an additional
connection with DIGITAL AUDIO OUT
(OPTICAL) is necessary.
USB 1/2,
• Connecting a large USB device may
interfere with other connected devices
beside it.
• When connecting a large USB device,
connect to the USB 1 port.
8
GB
/
USB 3
HDMI 1 AUDIO IN
• If the device has a DVI jack, connect it to
HDMI IN 1 through a DVI - HDMI adapter
interface (not supplied), and connect the
device's audio out jack to HDMI 1 AUDIO
IN.
REMOTE RS-232C*
This terminal is for service use only.
IR BLASTER*
2
• Use your Sony remote control to control
your External Box (cable/satellite box).
Connect the IR Blaster Cable*
Blaster port on your TV. Place one or both
of the other two ends as shown below.
• To perform IR Blaster setup, press
HOME and select [Settings] t
[External inputs] t [IR Blaster setup].
*1 When connecting mono equipment, connect to the
L (MONO) audio jack (socket).
*2 Only on limited region/country/TV model.
2
*
2
2
to the IR