Sony Bravia 40R45xB Інструкція з експлуатації Посібник з експлуатації - Сторінка 24

Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для ТЕЛЕБАЧЕННЯ Sony Bravia 40R45xB. Sony Bravia 40R45xB 32 сторінки.

Sony Bravia 40R45xB Інструкція з експлуатації Посібник з експлуатації
Using Audio and Video
Equipment
1
Turn on the connected equipment.
2
Press
to display the input source.
3
Press
/
then
input source.
The highlighted item is selected if 2 seconds
pass without any operation.
Note
• When connecting a digital audio system not
compatible with Audio Return Channel (ARC)
technology using an HDMI cable, you need to connect
an optical audio cable to the DIGITAL AUDIO OUT
(OPTICAL) to output digital sound.
• When connecting with an HDMI cable, be sure to use
HighSpeed HDMI Cable with Cable Type Logo
(Recommended SONY Cable).
• When connecting mono equipment, connect the
audio cable to the L (mono) jack.
To use MHL device
Use an authorised MHL 2 CABLE with MHL logo
(not supplied).
The TV simultaneously charges the MHL-
compatible connected device while playing
photo/music/video files.
To use BRAVIA Sync devices
When connecting the TV to BRAVIA Sync
compatible equipment, you can control them
together.
Be sure to perform the necessary settings in
advance. The BRAVIA Sync Control settings must
be set on both the TV and the connected
equipment. See [BRAVIA Sync Settings]
(page 20) for the settings on the TV side. Refer
to the connected equipment operating
instructions for the settings on the connected
equipment side.
24
GB
to select the desired
To use DTV Scart Out
Setting Digital TV SCART Out
1
Select Digital RF input.
2
Press OPTION.
3
Press
/
then
4
Press
/
then
Note
When input : Digital TV + [SCART Out] : [On],
i
Some of remote commander keys will be disable:
(eg : HOME, PICTURE, WIDE etc.)
ii Below message will be display:
Feature is unavailable when SCART Out is
On.
To disable SCART Out, press OPTIONS
and choose "SCART Out: Off".
iii PQ (picture quality) setting will keep raw signal
condition when [SCART Out] : [On] is selected.
to select [SCART Out].
to select [On].