Cisco Profile Series Посібник для початківців - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник для початківців для Конференц-система Cisco Profile Series. Cisco Profile Series 42 сторінки. Jbod on the 12g sas modular raid controller
Також для Cisco Profile Series: Посібник для початківців (41 сторінок), Посібник користувача (44 сторінок), Посібник користувача (7 сторінок), Посібник для початківців (35 сторінок), Короткий довідник (2 сторінок), Посібник з монтажу (44 сторінок), Посібник з конфігурації (13 сторінок), Інструкція з монтажу (2 сторінок), Посібник з монтажу (2 сторінок), Посібник із швидкого старту (4 сторінок), Посібник із швидкого старту (4 сторінок), Посібник з встановлення (16 сторінок), Посібник для початківців (32 сторінок), Посібник (16 сторінок), Посібник для початківців (46 сторінок)

Друкувати сторінку

Cisco TelePresence Video Systems

Contents

How to configure your system

Before you can start using your video conference system you

must set the basic configurations as described in this chapter.

About user roles, user accounts and passwords

System/codec password

You need AdMiN rights to configure the system via web.

User roles: A user must possess one or a combination of

several

user

roles. three user roles exist, representing differ-

ent

rights: AdMiN, uSer and Audit. it is important to note

that these roles have

non-overlapping

A complete

administrator user account with full access rights,

like the default

admin

user, must possess all three roles.

You can read more on how to create and manage user accounts

in the administrator guide for your product.

D14639.09 Video Systems Getting Started Guide TC6.1, April 2013.

Introduction

User interfaces

Using a provisioning system, or configuring

each video conference system individually

Provisioning allows video conferencing network administrators

to manage many video systems simultaneously. in general,

you only have to put in the credentials of the provisioning

server to each video system; the rest of the configuration is

done automatically.

Without a provisioning system, you must configure each

video system individually. As a minimum, you must set the iP

and SiP/H.323 parameters. You should also set the correct

time and date.

Basic configuration with or without a provisioning system is

described in the remainder of this chapter.

NoTe:

initially,

We strongly recommend that you set a password for this user,

and any other users possessing an AdMiN role, to restrict

access to system configuration.

A warning on the screen of your video system indicates if no

rights.

administrator password is set. to remove the warning you

must set an administrator password.

Confirguration

Configuration

no password is set for the default

admin

Appendices

Different user interfaces

We describe how to configure the video system using the

touch controller, the remote control or the web interface.

We also describe how to set the menu password using the

command line interface.

the descriptions are marked with the following colors.

Touch controller

Remote control

Web interface

Command line

Menu password

user.

NoTe:

initially, no menu password is set. We strongly recom-

mend that you set a menu password to restrict access to the

Administrator menus on the touch controller and the remote

control. the menu password can be set with the remote

control or on the web interface.

You need to enter this password to configure the video system

using a touch controller or a remote control.

Getting Started Guide

Contacts