Cisco Quick Set MX200 Посібник користувача - Сторінка 34
Переглянути онлайн або завантажити pdf Посібник користувача для Конференц-система Cisco Quick Set MX200. Cisco Quick Set MX200 44 сторінки. Telepresence conference system
Також для Cisco Quick Set MX200: Короткий довідник (2 сторінок)
Друкувати сторінку
Cisco TelePresence System Profile Series, Codec C Series, Quick Set C20, MX200
Contents
Getting started
Administrator settings—Call settings
The Call Settings pane lets you specify:
•
Auto Answer On or Off. If you set this to On, the
system will respond automatically to incoming calls.
Note that the microphone will NOT be muted. If risk of
eavesdropping is an issue, you may want to set this
setting to Off.
•
Auto Answer Delay. Specify the time until your
system actually responds to an incoming call.
•
Default Call Rate. If your connection has limited
capacity you may want to use this setting.
•
Max Incoming/Outgoing Bandwidth. You may
specify these separately. May come in handy if you
are on an asymmetric connection.
•
Default Call Protocol. Specify which protocol to use
as default.
Note how the settings chosen are indicated. In the
example shown, Auto Answer is set to Off.
D14582.07
User guide Profile Series, Codec C Series, Quick Set C20, MX200, July 2011.
All contents are copyright © 2010–2011 Cisco Systems, Inc. All rights reserved.
Placing calls
Using directories
34
In-call features
Settings
Settings
User guide
Contact us
www.cisco.com