Cisco Spark Room Kit Plus Посібник з монтажу - Сторінка 17
Переглянути онлайн або завантажити pdf Посібник з монтажу для Конференц-система Cisco Spark Room Kit Plus. Cisco Spark Room Kit Plus 29 сторінок.
Друкувати сторінку
a.
Tilt the camera fully forward. If you
cannot tilt the camera fully forward,
go back to Step 2 and check that
the distance between the wall
bracket and the screen is large
enough.
—
0°
15°
—
0°
15°
b.
Move the two sliders to
adjust the tilt angle. The
tilt angle goes from 0° to
15°, in steps of five. Do not
exceed the 15° tilt angle.
c.
Tilt the Quad Camera
back to normal position.
17
d.
You can check that the tilt angle
is adjusted correctly during the
software setup in Step 8.