DigiTech HOTROD Посібник - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник для Музична педаль DigiTech HOTROD. DigiTech HOTROD 12 сторінок. Distortion

Connections

The Hot Rod has a single input (INPUT) and a pair of outputs (AMP and

MIXER). The two outputs give you the following options: running into a

guitar amplifier, running directly to a mixing console or recording device,

or both. The MIXER output uses DigiTech's advance CIT™ cabinet

modeling technology for an authentic guitar amplifier sound without

using an amp.

Follow these setup directions:

1.Turn the volume down on the amplifier/mixer you are connecting to.

2. Connect the pedal output to the amplifier/mixer input.

3. Connect the guitar to the pedal input.

4. Connect the power supply to the pedal (optional).

5.Turn the level control on the pedal to the minimum position.

6.Turn up your amplifier/mixer level to the desired listening level.

7.Turn on the pedal by pressing the pedal switch and gradually turn up

the level to the desired listening level.