Cisco SX80 Посібник користувача - Сторінка 17

Переглянути онлайн або завантажити pdf Посібник користувача для Конференц-система Cisco SX80. Cisco SX80 19 сторінок. With touchpad 10
Також для Cisco SX80: Посібник з монтажу (7 сторінок), Короткий довідник (2 сторінок), Посібник (45 сторінок), Посібник (45 сторінок), Посібник з монтажу (24 сторінок), Посібник з монтажу (2 сторінок), Короткий довідник (2 сторінок), Короткий довідник (2 сторінок), Посібник з монтажу (7 сторінок), Довідковий посібник (8 сторінок), Посібник для початківців (46 сторінок)

Cisco SX80 Посібник користувача

DUAL VIDEO ENABLED EQUIPMENT

Note: This information is only applicable for point to point calls when both units are using dual video
enabled equipment.
The equipment listed below supports dual video which allows users to display and view two different
live video feeds simultaneously . For instance, you could view both the PC presentation as well as the
person who delivers the presentation . With two video streams, the receiving site is able to control the
layout of how they view each of the feeds .
Cisco SX series equipment
MX200/300 (touchscreen)
If the connecting video system does not support dual video then no second video stream will be
established for this system and the camera or PC presentation will be shown as the main video feed .
TIP
If both pieces of equipment are dual video enabled then both sites are able to change their own
screen layout by pressing Layout and selecting the desired option .
Note: This information is only applicable to point to point calls between a dual video enabled presenting
site and a non-dual video enabled receiving site.
If the presenter site changes the Remote Layout to Equal, the receiving site will see both the camera
and the presentation in equal size within the one video feed . They also have the ability to show their
own selfview in the corner of the screen .
The receiving site does not have the ability to change the layout back to see just the presentation full
screen as they do not have that functionality on their non-dual video enabled equipment . The presenting
site will need to change the Remote Layout back to Single under the layout options .
If the other site mentions that their layout has changed it's possible that you have
changed the Remote layout option from single; to change it back:
1 . Swipe the the screen right to left and tap the black icon in the top right corner
of the box .
2 . Tap Single and then swipe left to right to exit .
Use caution when using layout options other than Single as the quality of the picture will be
TIP
reduced for the other site .
MBTelehealth
- SX80 with Touchpad10 User Guide
Dual Video Enabled Equipment
VX Clinical Assistant (mobile cart)
Ergotron (clinical mobile cart )
AVFI (non-clinical mobile cart)
Remote Layout
Page 17 of 19