DigiTech JamMan Express XT Посібник користувача - Сторінка 13

Переглянути онлайн або завантажити pdf Посібник користувача для Музична педаль DigiTech JamMan Express XT. DigiTech JamMan Express XT 18 сторінок. Stereo looper w/jamsync

Друкувати сторінку

DigiTech JamMan Express XT Посібник користувача

Recording Overdubs

Once a phrase has been recorded, overdubs can be added on top of the phrase�

To record overdubs:

1� Press the

FOOTSWITCH

the phrase will begin playing�

2� Press the

FOOTSWITCH

yellow and audio will be recorded on top of the phrase�

3� When done overdub recording, press the

session� The loop will continue playing along with the newly recorded overdub�

4� You can now decide whether you would like to undo the last overdub and re-record

it (see "Undoing/Redoing Overdubs" in the following section) or proceed and record

additional overdubs by repeating steps 2-3�

5� Press the

FOOTSWITCH

Undoing/Redoing Overdubs

When recording overdubs, you can choose to undo the last overdub recorded if you wish

to re-record it� If you change your mind or accidentally undo an overdub, you can then redo

the overdub to retrieve it�

To undo/redo an overdub:

1� Record an overdub as described in the previous section, "Recording Overdubs"�

2� Ensure the loop is playing (the

the

FOOTSWITCH

and hold the

FOOTSWITCH

indicating the overdub has been undone�

3� If you wish to restore the overdub, press and hold the

seconds to redo the overdub� The

overdub has been redone�

NOTE: Each time an overdub is added, the last overdub is merged with the original loop

and can no longer be undone using the Undo feature� If the combined loop and overdub

length exceed 10 minutes (e�g�, a 6 minute loop and 6 minute overdub, etc�), the two

will automatically be merged and the overdub cannot be undone� Overdubs added to a

recorded loop of 5 minutes or less will not be automatically merged�

to start loop playback� The

again to begin overdub recording� The

2 times quickly to stop loop playback�

PLAY LED

1 time to initiate loop playback� Once the loop is playing, press

for ~2 seconds� The

DUB LED

PLAY LED

to end the overdub recording

FOOTSWITCH

should be on)� If the loop is not playing, press

will quickly flash yellow,

DUB LED

FOOTSWITCH

will quickly flash yellow, indicating the

will light solid green and

will light solid

DUB LED

again for ~2