cable matters 103091 Посібник користувача - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник користувача для Подовжувач cable matters 103091. cable matters 103091 12 сторінок. A/v extender over cat6 with tcp/ip configuration and ir control

Друкувати сторінку

A/V Extender over Cat6 with TCP/IP Configuration and IR Control

3. CONNECTION INSTRUCTIONS

3.1 Installation Checklist

Please review the installation checklist before installing the A/V Extender over Cat6. Test an

active configuration with the included HDMI cables before installing permanently. Sections 3.2

and 3.3 provide a description of the external connections to the A/V Extender Transmitter and

Receivers. Section 3.6 provides Troubleshooting notes.

Power off the connected HDMI source and destination equipment before connecting the A/V

•

Extender Transmitter and Receivers or any cabling.

The A/V Extender Transmitter and Receivers boxes can be surface mounted with the includ-

•

ed hardware.

Locate the A/V Extender Transmitter and Receivers within 5 feet of an electrical outlet for

•

power.

The included HDMI cables are recommended for the best performance. When using other

•

HDMI cables, they should be high quality with bare copper conductors in the shortest length

necessary.

Cat 6 cabling with 24 AWG wire is recommended for the best performance. All cabling or

•

network components connected to the A/V Extender Transmitter and Receivers should be

rated for Cat 6 performance.

Cat 6 unshielded twisted pair (UTP) cable is appropriate for short to medium lengths in a low

•

RFI/EMI noise environment. Cat 6 shielded cable (STP) is appropriate for medium to long

lengths with potential RF/EM interference.

The optional IR Transmitter cable (IR-T) must be within 5 feet of the HDMI source. It can be

•

mounted directly over the IR sensor of the video source so it can be controlled remotely.

Adhesive mounting circles are included for both cables.

The IR Receiver (IR-R) cable face must be positioned to have line of sight for a hand-held

•

remote.

Does not support Power over Ethernet (PoE): Do not connect the A/V Extender Transmitter

•

and Receivers through PoE improperly implanted devices; it does not work with other PoE

supported transmitters, or receivers.

Use the provided AC adapter, other adapters may not provide the power needed by this

•

device.