Sony CBK-SD01 Посібник з монтажу - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник з монтажу для Відеокамера. Sony CBK-SD01. Sony CBK-SD01 12 сторінок. Sdi output board
Також для Sony CBK-SD01: Посібник з монтажу (4 сторінок)
Друкувати сторінку
1-4. Opening and Closing the Inside
Panel
Opening the Inside Panel
n
Be sure to turn off the POWER switch, unplug the AC
power cord or remove the battery before starting the
following procedure to prevent the inside of the unit from
damage.
1. Loosen the four screws (with drop-safe) and open the
inside panel in the direction of the arrow.
m
. Folding the flexible card wire connected to the FP-
140 board (the FP-121A board for MSW-900/900P)
shortens the life of the flexible card wire significant-
ly. Be very careful when handling the flexible card
wire not to fold it.
. To install CBK-SD01 in MSW-900/900P, place the
unit so that the inside panel is positioned on top of
the POWER switch when the inside panel is opened.
PDW-510/510P/530/530P is shown.
Screw
(with drop-safe)
Hook
FP-140 board
Hinge
1-2 (E)
Hook
Hinge
Screws
(with drop-safe)
Inside panel
Flexible card wires
Screw (with drop-safe)
MSW-900/900P is shown.
POWER switch
Inside panel
Screw
(with drop-safe)
Hook
FP-121A board
Hinge
Hook
Hinge
Screws
(with drop-safe)
Inside panel
Flexible card wires
Screw (with drop-safe)
CBK-SD01