Sony CCD-PC1 Посібник з експлуатації - Сторінка 38

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Відеокамера. Sony CCD-PC1. Sony CCD-PC1 39 сторінок. Color video camera
Також для Sony CCD-PC1: Інструкція з експлуатації Посібник з експлуатації (7 сторінок)

Sony CCD-PC1 Посібник з експлуатації
1-2-l 2. Auto White Balance Adjustment
When adjustment is off, the color restoration for the white balance will be poor.
Subject
I White pattern standard picture frame
Filter Cl4 for color temperature correction
Filter
Adjusting remote control :
Measurement
point
LCD display (Page A)
White pattern standard picture frame,
Measuring
instrument
Filter Cl4 for color temoeratdre correction
Adjustment
page
F
11 (NORM R)
Adjustment
address
12 (NORM B')
R ratio 2B80 Z!I 40 (h)
Specified value
B ratio SE80 + 80 (h)
Note 1 : Make this adjustment after first performing the "Entry of Auto White Balance Reference Data".
Note 2 : When there are 2 digits of adjustment remote control A page data, they are displayed in the address.
When there are 4 bytes; the upper bytes are displayed in the the data section and the lower bytes in the address section.
Adjusting method :
Sequence
1
2
3
4
6
14
7
6
02
8
9
10
Handling after adjustments are complete
Sequence Page Address
1
6
14
2
3
F
10
Set the iris to fully open and display the clear chart on the
reference screen.
Place the Cl4 filter for.color temperature correction on the-
lens.
the
protect.
06
Press the PAUSE button after setting the data.
Press the PAUSE button after'setting the data.
Press the PAUSE button after setting the data.
04
Press the PAUSE button after setting the data.
Change data with the PLAY and STOP buttons, and set the
R ratio data for adjustment remote control A page, to the
standard value. (Note 2).
0.5
Press the PAUSE button.
Change data with the PLAY and STOP buttons, and set the
B ratio data for adjustment remote control A page, to the
standard value. (Note 2).
Data
Press the PAUSE button after setting the data.
00
Press the PAUSE button after setting the data.
00
Press the PAUSE button after setting the data.
Close.
6-16
I
Procedure
Procedure
Conditions
I
I
Conditions
I
I