Sony DCR-PC109 - Digital Handycam Camcorder Посібник із застосування - Сторінка 31

Переглянути онлайн або завантажити pdf Посібник із застосування для Відеокамера. Sony DCR-PC109 - Digital Handycam Camcorder. Sony DCR-PC109 - Digital Handycam Camcorder 44 сторінки. Limited warranty (u.s. only)
Також для Sony DCR-PC109 - Digital Handycam Camcorder: Зауваження щодо використання (2 сторінок), Примітка до випуску (2 сторінок), Брошура (2 сторінок), Обмежена гарантія (1 сторінок)

Друкувати сторінку
DVD. The name of the power switch on the
camcorder varies depending on the model.
3
Insert a recorded cassette into your
camcorder.
4
Connect your camcorder to a
computer via an i.LINK cable
(optional). (p. 15)
Note
b
• When you connect your camcorder to a
computer, make sure you insert the connector in
the correct direction. If you insert the connector
forcibly, it may be damaged, and causes a
malfunction of your camcorder.
5
For touch panel models,
select [BURN DVD] on
of your camcorder.
For SEL/PUSH EXEC dial models,
press BURN DVD/VCD of your
camcorder, then select [DVD] on the
[SELECT DISC].
"Click to DVD" starts up and the on-screen
instructions appear on your computer.
The procedure of the menu setting varies
depending on the model.
6
Place a writable DVD in the disc drive
of the computer.
7
For touch panel models,
select [EXEC] on your camcorder.
For SEL/PUSH EXEC dial models,
press the dial on your camcorder.
BURN DVD
START
CREATE DVD?
EXEC
or
8
0:00:00:00
CANCEL
The status of the operation on your
computer is displayed on the LCD screen of
your camcorder.
CAPTURING: The picture recorded on
the tape is being copied to the computer.
CONVERTING: The picture is being
converted to the MPEG2 format.
WRITING: The picture is being written
onto the DVD.
Note
b
• The screen varies depending on the model.
Tip
z
• If you use a DVD-RW/+RW which has other
data stored on it, the message [This is a
recorded disc. Delete and overwrite?] appears
on the LCD screen of your camcorder. When
you select [EXEC], the existing data is erased
and new data is written.
Follow the steps below to finish
creating a DVD.
For touch panel models
Select [
END] or [NO] of your
camcorder.
For SEL/PUSH EXEC dial models
Press BURN DVD/VCD of your
camcorder.
The disc tray comes out automatically.
BURN DVD
COMPLETED
C r e a t e a n o t h e r
c o p y ?
D i s c t r a y o p e n s .
YES
To create another DVD with the same
content, follow the on-screen instructions,
then repeat steps 7 and 8. The disc tray
comes out and place a new writable DVD in
the disc drive.
Note
b
• The screen varies depending on the model.
0:00:00:00
NO
,continued
31
Other functions