Argo POLIFEMO SLIM Інструкція з експлуатації Посібник з експлуатації - Сторінка 10

Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Кондиціонер Argo POLIFEMO SLIM. Argo POLIFEMO SLIM 12 сторінок. Evaporative air cooler

Argo POLIFEMO SLIM Інструкція з експлуатації Посібник з експлуатації
If you want to keep the temperature of the water in the tank below the ambient temperature for a long time, in order to
favor cooling in the hottest season, add one of two tablets of synthetic ice supplied to the water in the tank, after having
left it in the freezer for the time necessary for its complete consolidation. Ice absorbs heat from water.
Continuous use of ice is recommended to optimize the cooling capacity.
It is possible that the first time you use it, you will notice a perfume or the water takes on a particular color: there are no
health risks.
WARNING: ALWAYS UNPLUG THE APPLIANCE BEFORE CLEANING OR MAINTENANCE
PROCEDURES. IMPORTANT: DO NOT SUBMERGE THE PRODUCT IN WATER
Cleaning the outside surface of the appliance
Use a soft cloth to remove any dust from the product.
If this is not enough, use a soft cloth dampened with water and a mild detergent at a temperature not exceeding 50°C. Let
the appliance dry completely before using it.
Do not use corrosive detergents or solvents such as petrol. Do not wash the appliance with water.
chemical substances or other items that may damage the surface to clean it.
Use a vacuum cleaner to remove dust from the air inlet/outlet grilles.
Cleaning the dust filters, the honeycomb panel and the water tank
Clean the dust filters frequently, at least once a month.
Gently remove the filter assembly on the rear side of the appliance and the side air filters, then extract the honeycomb
panel, as shown in the drawing below.
Clean the dust filters with a soft brush or vacuum cleaner and wash it in water with a neutral detergent.
Soak the honeycomb filter in detergent for a few minutes, then wash it and perfectly dry it.
Allow the air filters and honeycomb filters to dry completely after washing.
After removing the water tank, clean it with a cloth soaked in detergent, then rinse it with water and remove any residual
water.
After cleaning, reinstall the components.
STORAGE
If the appliance is not used for prolonged periods, disconnect the power cord and store the appliance with this manual in
its original packaging, in a cool and dry place.
Before packaging, the honeycomb filter and dust filters should be dry, and there is no water in the tank.
In case of prolonged non-use, remove the remote control battery before storing it.
V 01/21

MAINTENANCE AND STORAGE

Do not use oils,
21