Cisco 3600 Series Посібник користувача - Сторінка 11

Переглянути онлайн або завантажити pdf Посібник користувача для Мережеве обладнання Cisco 3600 Series. Cisco 3600 Series 25 сторінок. Memory upgrade
Також для Cisco 3600 Series: Огляд продукту (10 сторінок), Інструкції з оновлення (30 сторінок), Посібник користувача (17 сторінок), Примітка до заявки (41 сторінок), Посібник з конфігурації (36 сторінок), Додаток (15 сторінок), Посібник користувача (7 сторінок), Посібник (5 сторінок), Примітка до конфігурації (23 сторінок), Примітка до конфігурації (18 сторінок), Примітка до конфігурації (25 сторінок)

Друкувати сторінку
Cisco 3600 Series Посібник користувача
V.110 Support for Cisco 3600 Series Digital Modems
Field
Modem config
Protocol
Compression
Management config
TX signals
RX signals
Last clearing of "show
modem" counters
Transmit Speed
Counters
Description
Current modem configuration, which includes the fields Incoming,
Outgoing, Incoming and Outgoing, and Unknown.
Protocol the modem is running such as Normal, Direct, reliable/MNP4, and
reliable/LAPM (Link Access Procedure for Modems).
Compression algorithm running on the modem, such as None, V42bis, and
MNP5.
Indicates if the modem is configured for out-of-band feature polling.
Transmit signal levels. For modulations that do not support signal-to-noise
calculations, the ratio is 0.
Transmit signal levels.
Last time the modem counters were cleared using the clear modem
counters command. A summary of modem events also appears:
•
Incoming completes and failures—Total number of incoming
connection requests that the modem answered and successfully or
unsuccessfully connected with the remote DCE device.
Outgoing completes and failures—Total number of outgoing
•
connection requests that the modem dialed and successfully or
unsuccessfully connected with the remote DCE device.
Failed dial attempts—Number of times the modem attempted to dial
•
out but the call failed to leave the modem.
Ring no answers—Number of times the integrated modem detected
•
ringing but did not answer the incoming call.
Busied outs—Number of times the integrated modem was intentionally
•
taken out of service (for example, the modem busyout command was
enabled on the modem).
•
No dial tones—Number of times the dial-out attempt failed because the
modem failed to detect a dial tone.
Dial timeouts—Number of times the modem has timed out while
•
attempting to dial.
Watchdog timeouts—Number of times the modem internal watchdog
•
timer has expired.
No carriers—Number of times the modem disconnected because no
•
carrier was present.
Link failures—Number of times the modem has detected a link failure.
•
Resets—Number of times the modem has been reset.
•
recover oob—Number of times the out-of-band feature has been
•
cleared and reinitialized.
Protocol timeouts and errors—Number of times the modem protocol
•
failed to make a call connection.
Lost events—Number of incomplete modem events performed by the
•
modem.
List of connection speeds that were sent by the modem.
show modem
Cisco IOS Release 12.1(5)T
11