Cisco 3700 series Технічний паспорт

Переглянути онлайн або завантажити pdf Технічний паспорт для Мережеве обладнання Cisco 3700 series. Cisco 3700 series 8 сторінок. Siemens hipath 4000 release 1 and siemens hicom 330e release 3.1 to cisco ios voice gateway using e1 qsig with h.323
Також для Cisco 3700 series: Встановлення та форматування (34 сторінок), Інструкції з оновлення (30 сторінок), Примітка до заявки (41 сторінок), Посібник з монтажу (12 сторінок)

Data Sheet

Cisco E1/T1 ISDN PRI Network Modules for Cisco 2610-51XM,

2800, 2691, 3660, 3700 and 3800 Series Routers

The versatility of Cisco

E1/T1 connectivity and Integrated Services Digital Network Primary Rate Interfaces (ISDN PRI). Customers continue to deploy

E1 and T1 circuits for Wide Area Network (WAN) connectivity, ISDN dial-backup, and digital modem termination in the Power

Branch Office Environment. Cisco now makes it possible to terminate T1 and E1 PRI connections in a single network module.

Available in single and dual port models, the NM-1CE1T1-PRI and NM-2CE1T1-PRI cards coupled with Cisco 2610-51XM, 2800,

2691, 3660, 3700 and 3800 Series routers, enhance and simplify customers' WAN connectivity options (Figure 1).

Figure 1. Single-Port E1/T1 ISDN PRI Network Module (NM-1CE1T1-PRI)

The Cisco E1/T1 ISDN PRI Network Module's integrated channel service unit (CSU) provides direct connection to the Telecommunications

network, thus allowing customers to consolidate customer premises equipment (CPE). This provides multifunction dial access aggregation,

routing functionality, VPN and firewall security, and other capabilities right inside the Cisco router in power branch office environments. Both

the 1-port and 2-port versions offer support for balanced and unbalanced E1 connectivity and conform easily to customers' specific applications.

The Cisco E1/T1 ISDN PRI network modules also supply connectivity for internal digital modems in the Cisco 3660, 3700 and 3800 series routers,

with connectivity options for PRI, T1 channel associated signaling (T1-CAS), and E1-CAS R2 signaling. This provides for a high concentration of

V.92-compatible modems, while still allowing expandability for other critical services.

FEATURES AT-A-GLANCE

Cisco IOS

Software configurable for T1 or E1 operation

Balanced or unbalanced E1 termination in the same module

Integrated CSU/DSU (channel service unit/data service unit) per port

Full or fractional E1/T1—can be fully channelized

Supports PRI for data, T1-CAS, and E1-CAS R2 signaling

E1 unframed and framed modes (G.703/G.704) available

Interoperates with NM-xDM digital modem network modules

Bantam (tty) jacks for easy network monitoring

V.54 loopback compatible

2610-51XM, 2800, 2691, 3660, 3700 and 3800 series routers is demonstrated by their broad support of

Page 1 of 1