Cisco 3800 Series Посібник користувача

Переглянути онлайн або завантажити pdf Посібник користувача для Мережеве обладнання Cisco 3800 Series. Cisco 3800 Series 7 сторінок. Password recovery procedure
Також для Cisco 3800 Series: Технічний паспорт (8 сторінок), Примітка до заявки (41 сторінок), Посібник з усунення несправностей (15 сторінок), Технічний паспорт (20 сторінок), Посібник із швидкого старту (40 сторінок), Налаштування (32 сторінок)

Друкувати сторінку
Cisco 3800 Series Посібник користувача
Password Recovery Procedure for the Cisco 3600
and 3800 Series Routers
Document ID: 22189
Contents
Introduction
Prerequisites
Requirements

Components Used

Related Products
Conventions
Step−by−Step Procedure
Example of Password Recovery Procedure
Related Information
Introduction
This document describes how to recover the enable password and the enable secret passwords. These
passwords protect access to privileged EXEC and configuration modes. The enable password password can
be recovered, but the enable secret password is encrypted and must be replaced with a new password. Use the
procedure described in this document in order to replace the enable secret password.
Prerequisites
Requirements
There are no specific requirements for this document.
Components Used
The information in this document is based on these hardware versions:
•
Cisco 3600 Series Router
•
Cisco 3800 Series Router
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
Related Products
Refer to Password Recovery Procedures for information on how to recover passwords for related products.
Conventions
Refer to Cisco Technical Tips Conventions for information on document conventions.