Cisco 5400 Підготовка до встановлення

Переглянути онлайн або завантажити pdf Підготовка до встановлення для Мережеве обладнання Cisco 5400. Cisco 5400 6 сторінок. Frus
Також для Cisco 5400: Встановлення та оновлення (8 сторінок)

Друкувати сторінку

Preparing for Installation

•

Safety Recommendations and Warnings

Please read the following safety guidelines before you install this product:

• Review the safety warnings listed in Regulatory Compliance and Safety Information for the Cisco 5400

• Keep the chassis area clean and dust-free during and after installation.

• Keep the chassis in a safe place when you remove the chassis cover.

• Do not wear loose clothing that could get caught in the chassis.

• Wear safety glasses when working under conditions that might be hazardous to your eyes.

• Do not perform any action that creates a hazard to people or makes the equipment unsafe.

Safety with Electricity

Follow these general guidelines when working on equipment that is powered by electricity:

• Locate the emergency power-off switch in the room in which you are working. If an electrical accident

• Disconnect all power before doing the following:

Safety Recommendations and Warnings, on page 1

Safety with Electricity, on page 1

Site Requirements, on page 2

Mounting Requirements, on page 4

Power Guidelines and Requirements, on page 4

Network Cabling Specification, on page 5

Required Tools and Equipment, on page 5

Enterprise Network Compute System before installing, configuring, or maintaining the device.

occurs, you can quickly turn off the power.

• Installing or removing a chassis.

• Working near power supplies.

Preparing for Installation