Argo ARKE TOWER Інструкція з експлуатації Посібник з експлуатації - Сторінка 8
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Обігрівач Argo ARKE TOWER. Argo ARKE TOWER 11 сторінок. Tower fan heater
Друкувати сторінку
INFORMATION FOR THE CORRECT DISPOSAL OF BATTERIES IN ACCORDANCE WITH EUROPEAN DIRECTIVE
2006/66/EC AND CHANGES INTRODUCED BY DIRECTIVE 2013/56 / EU
Replace batteries when they are depleted. At the end of their life, batteries must be disposed of separately from unsorted
waste. They must be taken to designated recycling centres or returned to a retailer providing this service. Separate
disposal of batteries prevents potential negative effects on the environment and human health due to inadequate disposal,
and also allows their constituent materials to be recovered and recycled, resulting in significant savings in terms of energy
and resources. In order to highlight the obligation regarding separate disposal, the battery carries the crossed-out dustbin
symbol. Illegal disposal of the product by the user may lead to administrative sanctions being applied as per current
regulations.
Place the fan heater in a vertical position on a flat and stable surface. Connect the power cable to a suitable electric socket
(220-240V~/50Hz). Use the handle to move the appliance.
SWITCHING ON/OFF
Put the on/off button (on the rear) in the "I" position. When the appliance emits a "beep", this means that the fan heater is
ready for use and enters stand-by mode. Press the
on. To switch off the fan heater, press the
button on the rear to "0" to turn the fan heater off.
HEATING
Press the
button on the control panel or on the remote control to select the low (1000W) or high (2000W) heating
function. The
LED in low function and
only mode.
TIMER
When the fan heater is operating, press the
Select the switch-off timer (1-2-4-8 h). When the set timer expires, the fan heater switches to stand-by mode.
TEMPERATURE REGULATION
The temperature can be regulated via the remote control or the control panel; press the
In CONTNUOUS
is 55°C, the It will enter stand-by mode. It is not possible to restart the heater until the room temperature is below 45°C.
The heater can also work until room temperature reach one of the default temperature 22°C-26°C-30°C. When the
selected room temperature is reached the fan heater will enter stand-by mode, when roome temperature decreased of
1°C the fan heater will start to work again.
ECO SMART FUNCTION
When the unit is operating, press the "ECO" button to activate the ECO SMART mode: the matching LED will light on the
display. In this mode the heating power is adjusted automatically,
-
When the room temperature is lower than the set temperature by a maximum of 1°C, the fan heater will operate at
low power (1000W).
-
When the room temperature is lower than the set temperature by more than 1°C, the fan heater will operate at high
power (2000W).
-
When the room temperature is equal to the set temperature, the fan heater goes into stand-by mode and switches
back on when the room temperature drops by at least 1°C.
The appliance is equipped with an anti-tipping device which interrupts operation when the product is tilted. Do not
position the appliance on its side or upside down.
V 03/19
HOW TO USE THE FAN HEATER
button again, let the unit cool down for about 30 seconds and switch the
in high function, will appear on the display. Select
mode the heater works without interruption for a maximum of 12 hours, or until room temperature
button on the control panel or on the remote control to switch it
button on the control panel or on the remote control to set the timer.
to activate the fan
button.
19