Cisco 7505 Інструкція із заміни Посібник із заміни - Сторінка 2

Переглянути онлайн або завантажити pdf Інструкція із заміни Посібник із заміни для Мережеве обладнання Cisco 7505. Cisco 7505 23 сторінки. 600w ac-input power supply and fan tray replacement
Також для Cisco 7505: Інструкція з монтажу Посібник з монтажу (15 сторінок), Посібник із швидкого старту (32 сторінок), Інструкція із заміни Посібник із заміни (18 сторінок)

Product Overview

The Cisco 7010 is the ﬁve-slot model in the Cisco 7000 series. The Cisco 7010 provides three

interface processor slots. Figure 1 shows the interface processor end of the Cisco 7010. The Route

Processor (RP) and Switch Processor (SP) (or Silicon Switch Processor [SSP]), which are required

system components in all Cisco 7000 Series routers, occupy the two top slots. The remaining three

slots support any combination of interface types: Ethernet, Token Ring, FDDI, and so forth.

Figure 1

Power switch

Chassis ground

screw

The Cisco 7505 is a ﬁve-slot model that provides four interface processor slots. Figure 2 shows the

interface processor end of the Cisco 7505. The Route Switch Processor (RSP1), which is a required

system component in the Cisco 7505 router, occupies the top slot. The remaining four slots support

any combination of interface types: Ethernet, Token Ring, FDDI, and so forth.

Figure 2

ower switch

Chassis

grounding

receptacles

The interface processor end of the chassis also contains the AC power receptacle (a DC-input power

supply is also available, but not shown), the system power on/off switch, and the DC OK power

status LED, all of which are part of the power supply but accessible through cutouts in the chassis

frame. (See Figure 1 or Figure 2.) To the left of the power switch and receptacle cutout is the chassis

ground screw that provides a chassis ground connection for ESD equipment or a grounding wire.

2 Cisco 7010 and Cisco 7505 Chassis Replacement Instructions

Cisco 7010—Interface Processor End

Power receptacle

Cisco 7505—Interface Processor End

Power receptacle

AC-input power supply

RSP slot

Interface processor slot 3

Interface processor slot 2

Interface processor slot 1

Interface processor slot 0

DC OK LED

AC-input power supply

RP slot

SP or SSP slot

Interface processor slot 2

Interface processor slot 1

Interface processor slot 0

DC OK LED