Cisco Aironet 1400 Series Посібник - Сторінка 29
Переглянути онлайн або завантажити pdf Посібник для Мережеве обладнання Cisco Aironet 1400 Series. Cisco Aironet 1400 Series 35 сторінок. Wireless bridge
Також для Cisco Aironet 1400 Series: Технічна специфікація (16 сторінок)
Друкувати сторінку
Radio Service Set ID (SSID)—Enter the case-sensitive SSID. The SSID is a
unique identifier that makes the bridge part of a specific wireless network.
When the bridge is powered up for the first time, its default SSID is
autoinstall. After a static IP address is assigned or the role in the radio
network is changed from Install-Mode, the default SSID is tsunami.
Broadcast SSID in Beacon—Use this setting to allow bridges that do not
specify an SSID to connect to the bridge.
•
Yes—This is the default setting; it allows bridges that do not specify an
SSID to associate with the bridge.
•
No—Other bridges must specify an SSID to associate with the bridge.
When No is selected, the SSID used by the non-root bridges must match
exactly the bridge's SSID.
Role in Radio Network—Click on the button that describes the role of the
bridge on your network:
•
Root—The bridge is connected to the main wired LAN.
•
Non-Root—The bridge is connected to the remote wired LAN to which
it provides a wireless link to the main wired LAN.
•
Install-Mode—The bridge is configured for automatic installation. This
setting enables an installer to establish a link between bridges for
antenna alignment purposes. This is the default setting.
29