Cisco Aironet 340 Series Посібник із швидкого старту - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Мережеве обладнання Cisco Aironet 340 Series. Cisco Aironet 340 Series 12 сторінок. Usb client adapter
Також для Cisco Aironet 340 Series: Посібник із швидкого старту (13 сторінок), Примітки до випуску (14 сторінок), Посібник із швидкого старту (16 сторінок), Посібник із швидкого старту (12 сторінок), Посібник із швидкого старту (12 сторінок)

Insert the Client Adapter

Note

If you are running Windows 95, 98, NT, or 2000 and a Cisco Aironet client adapter was

previously installed on your computer with the 6.10 driver, you must remove this driver before

you can insert your new client adapter and install its more recent driver. Refer to the Cisco

Aironet Wireless LAN Adapters Hardware Installation Guide for information on uninstalling

the 6.10 driver.

Note

If you are running Windows 95, you must copy the self-extracting Win95Driver.exe file

from the Win95 directory on the CD provided to a floppy disk or a directory on your hard drive

and extract the files before inserting your client adapter. Refer to the Cisco Aironet Wireless

LAN Adapters Hardware Installation Guide for instructions on installing the driver.

Caution

to conventional PC card slots and PCI expansion slots. In cases of custom or

nonconventional equipment, be alert to possible differences in PC card slot and PCI

expansion slot configurations.

Insert the PC Card Client

Adapter

Before you begin, examine the PC card

client adapter. One end has a dual-row,

68-pin PC card connector. The card is

keyed so it can be inserted only one way

into the PC card slot.

Note

The slot is on the left or right side of

the computer, depending on the model.

Turn on the computer before inserting

the PC card, unless you are running

Windows NT. For Windows NT, turn

off the computer before inserting the PC

card.

These procedures and the physical connections they describe apply generally

Caution

Never force the PC card

into a PC card slot. Forcing it will

damage both the card and the slot.

If the PC card does not insert easily,

remove the card and re-insert it.

Hold the PC card with the Cisco logo

facing up and insert it into the PC card

slot, applying just enough pressure to

make sure it is fully seated.

Proceed to the driver installation

instructions for your operating system.