Sony Power HADFX HDC-P1 Посібник з експлуатації - Сторінка 10
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Цифрова камера Sony Power HADFX HDC-P1. Sony Power HADFX HDC-P1 36 сторінок. Hd multi purpose camera
Також для Sony Power HADFX HDC-P1: Брошура (36 сторінок), Брошура (4 сторінок), Брошура (4 сторінок), Брошура (2 сторінок)
Друкувати сторінку
Installation
Attaching a Lens
For information on handling lenses, refer to the operation
manual for the particular lens
4
5
1
Remove the lens mount safety rubber, and then push
the lens fixing lever A upward and remove the lens
mount cap from the lens mount.
2
Align the lens' alignment pin C with the notch B in
the upper part of the lens mount and insert the lens
into the mount.
3
While supporting the lens, push the lens fixing lever
A downward to secure the lens.
4
Connect the lens cable to the LENS connector.
5
Secure the lens cable with the cable clamp.
6
Reattach the lens mount safety rubber.
10
Installation
B
A
1
3
C
2
Mounting the Camera to a Tripod
2
Platform
1
Attach the tripod attachment adapter directly to the
camera.
(Two 3/8-inch tripod screws: screw depth of 10 mm
(13/32 inches) or less)
2
Place the camera on the tripod and mount the camera
by sliding it forward along the groove of the platform
until it clicks into place.
Note
If the screws of the tripod attachment adapter are 1/4-inch
tripod screws, use inch conversion screws (Sony Part No.: 4-
170-419-02) to attach the adapter. For details on purchasing
inch conversion screws, and other information, contact a Sony
service representative or Sony sales representative.
1
Tripod attachment
adapter