Sony XCD-V60CR Посібник з експлуатації - Сторінка 18

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Цифрова камера Sony XCD-V60CR. Sony XCD-V60CR 30 сторінок. Digital camera module
Також для Sony XCD-V60CR: Посібник (4 сторінок), Технічний посібник (38 сторінок), Технічний посібник (39 сторінок), Інструкція з експлуатації (2 сторінок)

Друкувати сторінку

2-2-2. Color Camera

(XCD-U100CR/SX90CR/V60CR)

1. Shoot the pattern box in the center of the window

through the clear chart at the wide end.

2. Start the IIDC_CAM**** software.

3. Click WFM (Waveform Monitor) in the menu.

The waveform is displayed.

WFM

4. Start the IIDC_CAM**** software.

The IIDC control window is displayed.

5. Set the lens iris to F1.4. (Zoom at the Tele end)

6. Click the Exposure tab and adjust the shutter in the

window so that the Green level reaches close to 100%

(does not exceed 100% (236)) in the WFM window.

The shutter value (reference value) at which the Green

level reaches close to 100% on WFM is as follows.

XCD-V60CR:

XCD-SX90CR: 41

XCD-U100CR: 36

Exposure tab

2-4

xxxxxxxx

7. Click the "Adjust" tab in the IIDC control window.

[AdjustWB] button

[Gain0dB] button

8. Click the [AdjustWB] button to adjust the color.

9. Click the [Gain0dB] button.

The Gain 0dB adjustment is performed.

10. Check that the adjustment level satisfies the specifica-

tion A.

A = 235 1 step

If the specification A is not satisfied, perform the

procedure from step 1 again.

11. After the adjustment is completed, click the [Write]

button and write the adjustment value.

12. Click the [AdjustWB] button.

The WB adjustment is performed.

13. Check that the adjustment level satisfies the specifica-

tion B.

B = 235 1 step

If the specification B is not satisfied, perform the

procedure from step 1 again.

14. After the adjustment is completed, click the [Write]

button and write the adjustment value.

Green level

[Write] button

xxxxxxxx

XCD-U100/SX90/V60

XCD-U100CR/SX90CR/V60CR