Sony 4-183-777-12(1) Інструкція з експлуатації - Сторінка 2
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Стереосистема Sony 4-183-777-12(1). Sony 4-183-777-12(1) 2 сторінки. Sony micro hi-fi component system operating instructions
Друкувати сторінку
Other Operations
Creating your own program
Using the Timers
(Program Play)
The system offers two timer functions. If you use the Play
Timer with the Sleep Timer, the Sleep Timer has priority.
1
Press FUNCTION +/ (or FUNCTION on the unit)
Use buttons on the remote to use the timer functions.
repeatedly to select the CD function.
Sleep Timer:
2
Press PLAY MODE
repeatedly until "PGM" appears
You can fall asleep to music. This function works even if
while the player is stopped.
the clock is not set.
3
Press /
repeatedly until the desired
Press SLEEP
repeatedly. If you select "AUTO, " the
track or file number appears.
system automatically turns off after the current disc stops
When programming files, press
+/
repeatedly
or in 100 minutes.
to select the desired folder, and then select the desired
Play Timer:
file.
You can wake up to CD, tuner or iPod at a preset time.
Make sure you have set the clock.
1
Prepare the sound source.
Prepare the sound source, and then press VOLUME
+/
to adjust the volume.
Selected track or file
Total playing time of program
To start from a specific track or file, create your own
number
(including selected track
or file)
program.
2
Press TIMER MENU
.
4
Press
(or ENTER on the unit)
to add the track
3
Press /
repeatedly to select "PLAY SET?, " and
or file to the program.
then press
.
" . " appears when the total program time
"ON" appears, and the hour indication flashes.
exceeds 100 minutes for a CD, or when you select a
4
Set the time to start playback.
CD track whose number is 21 or over, or when you
select an MP3 file.
Press /
repeatedly to set the hour, and then
5
press
.
Repeat steps 3 through 4 to program additional
tracks or files, up to a total of 25 tracks or files.
The minute indication flashes. Use the procedure
above to set the minutes.
6
To play your program of tracks or files, press (or
CD on the unit)
.
5
Use the same procedure as in step 4 to set the time
The program remains available until you open the disc
to stop playback.
tray. To play the same program again, press (or
6
Select the sound source.
CD on the unit)
.
Press /
repeatedly until the desired sound
source appears, and then press
To cancel Program Play
shows the timer settings.
Press PLAY MODE
repeatedly until "PGM"
7
Press
to turn off the system.
disappears while the player is stopped.
The system turns on 15 seconds before the preset time.
If the system is on at the preset time, the Play Timer
To delete the last track or file of the program
will not play.
Press CLEAR
while the player is stopped.
To activate or check the timer again
Presetting radio stations
1
Press TIMER MENU
.
"TIMER SEL?" flashes in the display.
You can preset your favorite radio stations and tune
2
Press
.
them in instantly by selecting the corresponding preset
3
number.
Press /
repeatedly to select "PLAY SEL?, " then
Use buttons on the remote to preset stations.
press
.
1
Tune in the desired station (See "Listening to the
To cancel the timer
radio").
Repeat the same procedure as above until "TIMER
2
Press TUNER MEMORY
.
OFF?" appears in step 3, and then press
To change the setting
Start over from step 1.
Notes for the iPod user
Preset number
Make sure the iPod is not playing when using the Play Timer.
The Play Timer may not be activated depending on the status of the
connected iPod.
3
Press +/
repeatedly to select your desired
preset number.
Tip
The Play Timer setting remains as long as the setting is not canceled
If another station is already assigned to the selected
manually.
preset number, the station is replaced by the new
station.
4
Press
.
5
Repeat steps 1 through 4 to store other stations.
You can preset up to 20 DAB, 20 FM and 10 AM
stations. The preset stations are retained for about half
a day even if you disconnect the power cord or if a
power failure occurs.
6
To call up a preset radio station, press TUNING
MODE
repeatedly until "PRESET" appears, and
then press +/
repeatedly to select the desired
preset number.
Note on presetting DAB stations
You can preset a DAB service only when it can be received.
. The display
.
To improve tuner reception
Troubleshooting
Turn off CD player power by using the CD power
management function. By default, CD power is turned on.
1
Make sure the power cord and speaker cords are
1
Press FUNCTION +/ (or FUNCTION on the unit)
correctly and firmly connected.
repeatedly to select the CD function, and then turn
off the system.
2
Find your problem in the checklist below, and take
2
the indicated corrective action.
After "STANDBY" stops flashing, press
unit while holding down CANCEL
If the issue persists, contact your nearest Sony dealer.
"CD POWER OFF" appears. With CD player power
If the STANDBY indicator flashes
turned off, disc access time is increased. To turn on
Immediately unplug the power cord, and check the
CD player power, repeat the procedure until "CD
following items.
POWER ON" appears.
If your system has a voltage selector, is the voltage
selector set to the correct voltage?
To reset the system to factory settings
Are you using only the supplied speakers?
If the system still does not operate properly, reset the
Is anything blocking the ventilation holes on the top
system to factory settings.
or back of the system?
Use buttons on the unit to reset the unit to its factory
Is the iPod connector
short-circuited?
default settings.
After the STANDBY indicator
stops flashing,
1
Disconnect and reconnect the power cord, and then
reconnect the power cord, and turn on the system. If
turn on the system.
the issue persists, contact your nearest Sony dealer.
2
Press
, VOL +
and CANCEL
same time.
General
All user-configured settings, such as preset radio
Sound comes from one channel, or the left and
stations, timer, and the clock, are deleted.
right volumes are unbalanced.
iPod
Place the speakers as symmetrically as possible.
Connect only the supplied speakers.
There is no sound.
Severe hum or noise.
Make sure the iPod is connected securely.
Move the system away from sources of noise.
Make sure the iPod is playing music.
Connect the system to a different wall socket.
Adjust the volume.
Install a noise filter (available separately) to the power
The sound is distorted.
cord.
Make sure the iPod is connected securely.
The remote does not function.
Turn down the volume.
Remove any obstacles between the remote and the
Set the "EQ" setting of the iPod to "Off " or "Flat. "
remote sensor
on the unit, and position the unit
away from fluorescent lights.
The iPod does not function.
Point the remote at the system's sensor.
Make sure the iPod is connected securely.
Move the remote closer to the system.
Make sure the iPod is updated with the latest software.
If not, update the iPod before using with the system.
CD/MP3 player
Because operation of the system and the iPod are
different, you may not operate the iPod using buttons
The sound skips, or the disc will not play.
on the remote or unit. In this case, use control buttons
Wipe the disc clean, and replace it.
on the iPod.
Move the system to a location away from vibration (for
Remove the iPod, then reconnect it.
example, on top of a stable stand).
The iPod cannot be charged.
Move the speakers away from the system, or place them
Make sure the iPod is connected securely.
on separate stands. At high volume, speaker vibration
may cause the sound to skip.
Play does not start from the first track.
Messages
Press PLAY MODE
repeatedly until both "PGM"
and "SHUF" disappear to return to normal play.
CD Over: You have reached the end of the disc while
Starting playback takes more time than usual.
pressing
during playback or pause.
The following discs take a longer time to start playback.
Complete!: The preset operation ended normally.
a disc recorded with a complicated tree structure.
LOCKED: The disc tray does not open. Contact your
a disc recorded in multisession mode.
nearest Sony dealer.
a disc that has not been finalized (a disc to which data
No Disc: There is no disc in the system, or you have
can be added).
loaded a disc that cannot be played.
a disc that has many folders.
No Step: All of the programmed tracks or files have been
erased.
Tuner
No Preset (DAB only): There is no stored preset station.
No Service (DAB only): There is no supported DAB
Severe hum or noise, or stations cannot be
broadcast in your country or region.
received. ("TUNED" or "STEREO" flashes on the
Push STOP!: You pressed PLAY MODE
display.)
playback.
Connect the antenna properly.
Reading: The system is reading information of the disc.
Find a location and an orientation that provide good
Some buttons are not available.
reception, and then set up the antenna again.
Step Full!: You tried to program more than 26 tracks or
Keep the antenna away from the speaker cords and the
files (steps).
power cord to avoid picking up noise.
TIME NG!: The Play Timer start and end times are set to
Connect a commercially available external antenna.
the same time.
Consult your nearest Sony dealer if the supplied AM
antenna has come off the plastic stand.
Turn off nearby electrical equipment.
Precautions
"TUNED" does not appear in the display (DAB
only).
Check all antenna connections, then perform the
Discs that this system CAN play
DAB Automatic Scan procedure (see "Before using the
Audio CD
system").
CD-R/CD-RW (audio data/MP3 files)
The current DAB service may not be available. Press
+/ (or TUNE +/ on the unit)
to select a different
Discs that this system CANNOT play
service.
CD-ROM
If you have moved to another area, some services/
CD-R/CD-RW other than those recorded in music CD
frequencies may have changed and you may not be able
format or MP3 format conforming to ISO9660 Level
to tune into your usual broadcast.
1/Level 2, Joliet
Perform the DAB Automatic Scan procedure to
CD-R/CD-RW recorded in multisession that have not
re-register the contents of broadcasts. (Performing this
ended by "closing the session"
procedure clears all previously stored presets.)
CD-R/CD-RW of poor recording quality, CD-R/CD-
RW that have scratches or are dirty, or CD-R/CD-RW
To change the AM tuning interval
recorded with an incompatible recording device
The AM tuning interval is factory-preset to 9 kHz (or
CD-R/CD-RW which is finalized incorrectly
10 kHz, for some areas).
Discs containing files other than MPEG 1 Audio Layer-
Use buttons on the unit to change the AM tuning
3 (MP3) files
interval.
Discs of non-standard shape (for example, heart,
1
Tune in any AM station, and then turn off the
square, star)
system.
Discs that have adhesive tape, paper, or sticker attached
2
to them
While holding down ENTER
, press
.
Rental or used discs with attached seals where the glue
All the AM preset stations are erased. To reset the
extends beyond the seal
interval to the factory preset, repeat the procedure.
Discs that have labels printed using ink that feels tacky
when touched
Notes on discs
Before playing, wipe the disc with a cleaning cloth from
the center out to the edge.
Do not clean discs with solvents, such as benzine,
thinner, or commercially available cleaners or anti-
static spray intended for vinyl LPs.
Do not expose discs to direct sunlight or heat sources
such as hot air ducts, nor leave it in a car parked in
direct sunlight.
On safety
iPod section
Compatible iPod models*:
Completely disconnect the power cord (mains lead)
* Update your iPod to use the latest software before you use it.
from the wall socket (mains) if it is not going to be used
for an extended period of time. When unplugging the
unit, always grip the plug. Never pull the cord itself.
Should any solid object or liquid get into the system,
unplug the system, and have it checked by qualified
on the
personnel before operating it again.
on the unit.
The AC power cord can be changed only by a qualified
iPod nano
service facility.
5th generation
(video camera)
On placement
Do not place the system in an inclined position or in
locations that are extremely hot, cold, dusty, dirty, or
humid or lacking adequate ventilation, or subject to
vibration, direct sunlight or a bright light.
Be careful when placing the unit or speakers on
surfaces that have been specially treated (for example,
with wax, oil, polish) as staining or discoloration of the
surface may result.
iPod nano
If the system is brought directly from a cold to a warm
4th generation
location or is placed in a very damp room, moisture
(video)
may condense on the lens inside the CD player, and
at the
cause the system to malfunction. In this situation,
remove the disc, and leave the system turned on for
about an hour until the moisture evaporates.
On heat buildup
iPod nano
Heat buildup on the unit during operation is normal
3rd generation
and is not cause for alarm.
(video)
Do not touch the cabinet if it has been used
continuously at a high volume because the cabinet may
have become hot.
Do not obstruct the ventilation holes.
On the speaker system
This speaker system is not magnetically shielded, and
the picture on nearby TV sets may become magnetically
distorted. In this situation, turn off the TV, wait 15 to
iPod
30 minutes, and turn it back on.
5th generation
If there is no improvement, move the speakers far away
(video)
from the TV.
Cleaning the cabinet
Clean this system with a soft cloth slightly moistened
with a mild detergent solution. Do not use any type
of abrasive pad, scouring powder, or solvent, such as
thinner, benzine, or alcohol.
iPod
4th generation
Specifications
Speaker
Speaker system: 2-way, bass-reflex type
Speaker units
Main unit
Woofer: 100 mm dia., cone type
Amplifier section
Tweeter: 40 mm dia., cone type
DIN power output (rated):
Rated impedance: 6 ohms
18 watts + 18 watts (6 ohms at 1 kHz, DIN)
Dimensions (w/h/d): Approx. 140 mm × 240 mm × 200 mm
Continuous RMS power output (reference): 25 watts + 25 watts (6 ohms at
Mass: Approx. 2.0 kg
1 kHz, 10% THD)
General
Music power output (reference): 38 watts + 38 watts (6 ohms at 1 kHz, 10%
Power requirements: 230 V AC, 50/60 Hz
THD)
Power consumption: 63 watts
Inputs
Dimensions (w/h/d) (excl. speakers): Approx. 215 mm × 140 mm × 298 mm
AUDIO IN (stereo mini jack): voltage 250 mV, impedance 47 kilohms
Mass (excl. speakers): Approx. 3.9 kg
Outputs
Supplied accessories: Remote Commander (1)/R6 (Size AA) batteries (2)/AM
PHONES (stereo mini jack): accepts headphones of 8 ohms or more
loop antenna (1)/FM/DAB lead antenna (2)/Speaker cords (2)
SPEAKER: accepts impedance of 6 to 16 ohms
Design and specifications are subject to change without notice.
CD player section
System: Compact disc and digital audio system
Laser Diode Properties
Standby power consumption: 0.5 W
Emission Duration: Continuous
Halogenated flame retardants are not used in the certain printed
Laser Output*: Less than 44.6 µW
* This output is the value measurement at a distance of 200 mm from the
wiring boards.
objective lens surface on the Optical Pick-up Block with 7 mm aperture.
Frequency response: 20 Hz 20 kHz
Signal-to-noise ratio: More than 90 dB
during
Dynamic range: More than 90 dB
Tuner section
DAB tuner section:
Frequency range*
Band-III: 174.928 (5A) MHz 239.200 (13F) MHz
* For details, see "DAB frequency table" below.
Antenna: FM/DAB lead antenna
Antenna terminal: 75 ohms, F female
FM stereo, FM/AM superheterodyne tuner
FM tuner section:
Tuning range: 87.5 MHz 108.0 MHz (50 kHz step)
Antenna: FM/DAB lead antenna
Antenna terminals: 75 ohms unbalanced
Intermediate frequency: 10.7 MHz
AM tuner section:
Tuning range: 531 kHz 1,602 kHz (9 kHz step)
Antenna: AM loop antenna, external antenna terminal
Intermediate frequency: 450 kHz
DAB frequency table (Band-III)
Frequency
Label
Frequency
Label
174.928 MHz
5A
209.936 MHz
10A
176.640 MHz
5B
211.648 MHz
10B
178.352 MHz
5C
213.360 MHz
10C
180.064 MHz
5D
215.072 MHz
10D
181.936 MHz
6A
216.928 MHz
11A
183.648 MHz
6B
218.640 MHz
11B
185.360 MHz
6C
220.352 MHz
11C
187.072 MHz
6D
222.064 MHz
11D
188.928 MHz
7A
223.936 MHz
12A
190.640 MHz
7B
225.648 MHz
12B
192.352 MHz
7C
227.360 MHz
12C
194.064 MHz
7D
229.072 MHz
12D
195.936 MHz
8A
230.784 MHz
13A
197.648 MHz
8B
232.496 MHz
13B
199.360 MHz
8C
234.208 MHz
13C
201.072 MHz
8D
235.776 MHz
13D
202.928 MHz
9A
237.488 MHz
13E
204.640 MHz
9B
239.200 MHz
13F
206.352 MHz
9C
208.064 MHz
9D
iPod classic
iPod touch
120 GB
2nd generation/
160 GB (2009)
iPod touch
Late 2009
iPod classic
iPod touch
160 GB (2007)
1st generation
iPod nano
iPod classic
2nd generation
80 GB
(aluminum)
iPod nano
iPod
1st generation
4th generation
(color display)
iPod mini