Sony Aiwa CX-JN20 Посібник з експлуатації - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Стереосистема Sony Aiwa CX-JN20. Sony Aiwa CX-JN20 35 сторінок.
Друкувати сторінку
MC COLD RESET
• The cold reset clears all data including preset data stored in the
RAM to initial conditions. Execute this mode when returning
the set to the customer.
Procedure:
1. In the standby status, while pressing the
[POWER]
button.
2. The set is reset, then becomes standby status.
GC TEST MODE
Procedure:
[POWER]
1. Press the
button to turn the power on.
2. While pressing the
x
button, press the
5 seconds.
3. It change displays in order of model type, version and suffix at
2 seconds interval, then the display is back to normal status.
AMP TEST MODE
Procedure:
1. In the status where AC plug is disconnected, while pressing
[VIDEO/AUX]
the
button, connect the AC plug to turn the
power on. Then enter the AMP test mode and display "AMP
TEST".
[VOLUME]
2. If turn the
knob clockwise, it displays "VOLUME
MAX", and if turn the knob counterclockwise, it displays
"VOLUME 0".
[TREBLE]
[BASS]
3. If the
and
counterclockwise, it change displays in order of "EQ MAX",
"EQ MIN" and "EQ FLAT".
4. To release from this mode, disconnect the AC plug and turn
the power off.
DISC TRAY LOCK
Procedure:
[POWER]
1. Press the
button to turn the power on.
2. While pressing the
button, press the
x
button for 5 seconds.
3. The message "LOCKED" is displayed and the tray is locked.
(Even if exiting from this mode, the tray is still locked)
4. To release this lock, while pressing the
the
OPEN/CLOSE Z
button for 5 again.
5. The message "UNLOCKED" is displayed and the tray is un-
locked.
CD REPEAT 5 LIMIT CANCEL MODE
• Number of repeat for CD playback is 5 times when the repeat
mode is "REPEAT". This mode enables CD to repeat playback
for limitless times.
Procedure:
[POWER]
1. Press the
button to turn the power on.
2. In the repeat on status, while pressing the
[CD]
button to enter the CD repeat 5 limit cancel mode and
repeat mark blinks on the fluorescent indicator tube.
3. To release this mode, press the
power off.
SECTION 4
TEST MODE
button, press the
x
[POWER]
button for
knobs are turned clockwise or
OPEN/CLOSE Z
x
button, press
button, press the
x
[POWER]
button to turn the
FUNCTION CHANGE MODE
• Select either TV, VIDEO or AUX (MD) of the external function
input.
Procedure:
[POWER]
1. Press the
button to turn the power on.
[VIDEO/AUX]
2. While pressing the
button.
3. Each time this operation is operated, it change displays in or-
der of "TV", "VIDEO" and "AUX".
CX-JN20/JN30
[POWER]
button, press the
17