Argo Fanny black Інструкція з експлуатації Посібник з експлуатації - Сторінка 4
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Вентилятор Argo Fanny black. Argo Fanny black 6 сторінок. Desk and stand fan
Друкувати сторінкуSet the height of stand fan by means of height adjustment ring (13).
Insert the rear grill (6) on the motor shaft (7) in the proper position (hanlde upward).
Screw the nut (5) in order to fasten the rear grill firmly.
Set the blade (4) on the motor shaft (7).
Tighten the nut (2) on the motor shaft (caution - counterclockwise direction).
With the aid of the ring (3) join front and rear grill and tighten the screw on the ring.
The appliance does not need to be installed.
Position the unit on a flat, stable surface.
Connect the power cord to a suitable power socket (220-240V~).
Do not use this fan in an area with high humidity, rich of dust or water.
Tilt adjustment: to regulate the air flow upward or downward, push gently the motor housing and adjust the angle of
inclination with respect to the neck.
Press ON on the control panel or remote control.
A sound will indicate that the appliance is on and the digital display shows the MODE NORMAL. Fan speed is low.
The fan can be switched off using the OFF button.
This fan can be used both as a fan, with 3 modes (Normal, Natural and Sleep) and 3 fan speed options (low, medium
and high).
SPEED DISPLAY
Fan speed
display
low/med/high
BUTTON ON/OFF/SPEED
Touching the ON/OFF button
the appliance begins to
operate at low speed.
Rotate it to increase speed.
To switch off the fan press
the button again.
V 2/13
HOW TO USE THE APPLIANCE
CONTROL PANEL AND AVAILABLE FUNCTIONS
MODE DISPLAY
Fan mode display
Normal
Natural
Sleep
TIMER ON/OFF DISPLAY
TIMER DISPLAY from 0,5 to 7,5 h
SWING BUTTON
10