DIGITEN DHTC-1011 Посібник із швидкого старту - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Контролер DIGITEN DHTC-1011. DIGITEN DHTC-1011 8 сторінок. Temperature and humidity controller

Друкувати сторінку

1. Setting Instruction

Setup Flow Chart

SET

Note: Before setting the parameters, please don't connect any

load (whether it is heating / cooling equipment, or humidification /

dehumidification equipment).

For example

Turn on the heater at 76°F and turn off at 80°F, turn on the humidifier at

40% humidity and turn off at 50%.

1. Press and hold the SET button for about 3 seconds until the

appears.

2. Short press the SET button to select the temperature.

3. Press the

4. Short press the SET button to the SV value page.

Long press SET

button for 3s

Run temperature

SET

Stop temperature

SET

Alarm low temperature

SET

Alarm high temperature

SET

Compressor Delay

time(mintures)

SET

Temperature

Calibration

Long press SET

button to save

and

button to set the RV to 76°F.

Run value

SET

Stop value

SET

Alarm high humidity

SET

Alarm low humidity

SET

Humidity Calibration

Long press SET

button to save