Sony MEX-BT39UW Дані про власника - Сторінка 30

Переглянути онлайн або завантажити pdf Дані про власника для Стереосистема Sony MEX-BT39UW. Sony MEX-BT39UW 45 сторінок. Bluetooth audio system
Також для Sony MEX-BT39UW: Технічна специфікація (4 сторінок), Встановлення/підключення (2 сторінок), Посібник з експлуатації (48 сторінок)

Друкувати сторінку

ZAP TIME (Zappin Time)

Selects the playback time for the ZAPPIN

function.

– "Z.TIME-1 (about 6 seconds)," "Z.TIME-2

(about 15 seconds)," "Z.TIME-3 (about 30

seconds)."

ZAP BEEP (Zappin Beep)

Has the beep sound between track passages:

"ON," "OFF."

LPF FREQ (Low Pass Filter Frequency)

Selects the subwoofer cut-off frequency:

"50Hz," "60Hz," "80Hz," "100Hz," "120Hz."

LPF SLOP (Low Pass Filter Slope)

Selects the LPF slope: "1," "2," "3."

SW PHASE (Subwoofer Phase)

Selects the subwoofer phase: "NORM," "REV."

HPF FREQ (High Pass Filter Frequency)

Selects the front/rear speaker cut-off frequency:

"OFF," "50Hz," "60Hz," "80Hz," "100Hz,"

"120Hz."

HPF SLOP (High Pass Filter Slope)

Selects the HPF slope (effective only when HPF

FREQ is set to other than "OFF"): "1," "2," "3."

LOUDNESS (Dynamic Loudness)

Reinforces bass and treble for clear sound at low

volume levels: "ON," "OFF."

BTM (page 15)

AUTO ANS*

(Auto Answer)

Answers an incoming call automatically.

– "OFF": to not answer automatically until

(handsfree) is pressed.

– "1": to answer automatically after 3 seconds.

– "2": to answer automatically after 10 seconds.

RINGTONE*

Uses the ringtone of this unit or the connected

cellular phone: "1 (this unit)," "2 (cellular

phone)."

BT INIT*

(Bluetooth Initialize) (page 26)

*1 When the unit is turned off.

*2 When FM is received.

Other functions

Using optional equipment

Auxiliary audio equipment

By connecting an optional portable audio device

to the AUX input jack (stereo mini jack) on the

unit and then simply selecting the source, you

can listen on your car speakers. The volume level

is adjustable for any difference between the unit

and the portable audio device. Follow the

procedure below:

Connecting the portable audio

device

1 Turn off the portable audio device.

2 Turn down the volume on the unit.

3 Connect to the unit.

* Be sure to use a straight type plug.

Adjusting the volume level

Be sure to adjust the volume for each connected

audio device before playback.

1 Turn down the volume on the unit.

2 Press (SOURCE/OFF) repeatedly until "AUX"

appears.

After that, "AUX FRONT IN" appears.

3 Start playback of the portable audio device at a

moderate volume.

4 Set your usual listening volume on the unit.

5 Adjust the input level (page 27).

Connecting cord*

(not supplied)