Sony MEX-N5100BT Інструкція з експлуатації Посібник з експлуатації - Сторінка 12
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Стереосистема Sony MEX-N5100BT. Sony MEX-N5100BT 42 сторінки. Bluetooth audio system
Також для Sony MEX-N5100BT: Інструкція з експлуатації Посібник з експлуатації (38 сторінок)
Друкувати сторінку
To set a parental control
The parental control feature allows you to limit
access to SiriusXM channels with mature content.
When enabled, the parental control feature requires
you to enter a passcode to tune to the locked
channels. Information on setting up the passcode
and locking channels can be found below.
1
Press MENU and rotate the control dial.
2
Select [SET GENERAL] -+ [SET PARENTAL] -+
[SET LOCK SEL]-+ [SET LOCK-ON].
3
Enter the passcode by rotating the control dial on
the unit or pressing
f /.
on the remote
commander.
To move the entry position, press
SEEK+/-
on the
unit
or+-!-+
on the remote commander.
The initial passcode is [0000].
4
After entering the passcode, press ENTER.
To unlock the channels, select [SET LOCK-OFF].
To change the passcode
1
Press MENU and rotate the control dial.
2
Select [SET GENERAL] -+ [SET PARENTAL] -+ [SET
CODEEDIT].
3
Enter the current passcode on the current passcode
input display, then press ENTER.
The initial passcode is [0000].
4
Enter your new 4-digit passcode on the new
passcode input display, then press ENTER.
To change display items
Press DSPL to change as follows:
Channel Number (Default}_. Channel Name_. Artist
Name_. Song Title_. Content Info_. Category Name
_.Clock
12GB
Playback
Playing a Disc
1
Insert the disc {label side up).
Playback starts automatically.
Playing an iPod/USB Device
In these Operating Instructions, "iPod" is used as a
general reference for the iPod functions on an iPod
and iPhone, unless otherwise specified by the text
or illustrations.
For details on the compatibility of your iPod, see
"About iPod" (page 23} or visit the support site on
the back cover.
MSC (Mass Storage Class) and MTP (Media Transfer
Protocol} type USB devices (such as a USB flash
drive, digital media player, Android phone)
compliant with the USB standard can be used.
Depending on the digital media player or Android
phone, setting the USB connection mode to MTP is
required.
Notes
• For details on the compatibility of your USB device,
visit the support site on the back cover.
• Playback of the following files is not supported.
MP3/WMA/ AAC/FLAC:
- copyright-protected files
- DRM (Digital Rights Management) files
- Multi-channel audio files
MP3/WMA/AAC:
- lossless compression files
WAV:
- Multi-channel audio files
1
Connect an iPod/USB device to the USB
port (page 10).
Playback starts.
If a device is already connected, to start
playback, press SRC to select [USB] ([IPD]
appears in the display when the iPod is
recognized).
2
Adjust the volume on this unit.
To stop playback
Press and hold OFF for 1 second.