Sony MHC-RV222 Інструкція з експлуатації Посібник з експлуатації - Сторінка 13

Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Стереосистема Sony MHC-RV222. Sony MHC-RV222 48 сторінок.

Notes
• You cannot change the play mode during playback.
• Some time may be needed to start playback of discs
recorded in complex configurations such as many
layers.
• When the disc is inserted, the player reads all the
tracks on that disc. If there are many albums or non-
MP3 audio tracks on the disc, it may take a long time
for play to begin or for the next MP3 audio track to
start play.
• Do not save unnecessary albums or tracks other than
MP3 ones in the disc to be used for MP3 listening.
We recommend that you do not save other types of
tracks or unnecessary albums on a disc that has MP3
audio tracks.
• An album that does not include an MP3 audio track
is skipped.
• Maximum album number: 256 (including root
folder)
• Up to 512 tracks and albums of MP3 on a single disc
can be recognized on this unit.
• MP3 audio tracks are played back in the order that
they are recorded on the disc.
• Depending on the encoding/writing software,
recording device, or the recording media used at the
time an MP3 audio track is recorded, you may
encounter such problems as disabled playback,
sound interruptions, and noise.
Tip
When disc access takes a long time, set "CD POWER
ON" by CD power manage function (page 19).
To play a track by entering the
track number
You can also select the track you want using the
remote during Normal Play.
Press the number button(s).
To enter a track number over 10
1
Press >10.
2
Enter the corresponding digits for the same
number of "–" flashing in the display.
To enter 0, press 10/0.
Example:
To enter track number 30, press >10, then press 3 and
10/0.
Resuming playback from the
point you stopped the disc

— Resume Play

This system memorizes the point where you
stopped the VIDEO CD so you can resume from
that point.
Resume Play is not available for an audio CD
and a disc with MP3 audio tracks.
1
While playing a VIDEO CD, press x to
stop playback.
"RESUME" appears on your TV screen. If
"RESUME" does not appear, Resume Play
is not available.
2
Press N.
The player starts playback from the point
you stopped the VIDEO CD in step 1.
Notes
• You cannot perform Resume Play during Disc
Digest, Shuffle Play or Program Play.
• Depending on where you stopped the VIDEO CD,
the system may resume playback from a different
point.
• Resume play is canceled when:
– you press the number buttons, PLAY MODE, x,
DISC SKIP (DISC SKIP/EX-CHANGE on the
unit) or ./>.
– you disconnect the power cord.
– you turn off the system.
– you open the disc tray.
– you change the function to tuner when "CD
POWER OFF" is selected (page 19).
Tip
To view from the beginning of the VIDEO CD, press
x
in stop mode, then press
N
.
GB
13