Sony SEN-211 Інструкція з експлуатації Посібник з експлуатації - Сторінка 3
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Стереосистема Sony SEN-211. Sony SEN-211 16 сторінок.
Друкувати сторінку
Precautions
On safety
© Operate the unit only on 120 V AC, 60 Hz.
© Should any solid object or liquid fall into the unit, unplug
it and have it checked by qualified personnel before
operating it any further.
¢ Unplug the unit from the wall outlet if it is not to be used
for an extended period of time. To disconnect the cord,
pull it out by grasping the plug. Never pull the cord itself.
On installation
© Place the unit on a level surface.
© Do not install the unit in a location near heat sources such
as radiators or air ducts, or in a place subject to direct
sunlight, excessive dust, mechanical vibration or shock.
Good air circulation is essential to prevent internal heat
buildup in the unit. Place the unit in a location with
adequate air circulation. Do not place the unit on a soft
surface, such as a rug that would block the ventilation
holes on the bottom.
Do not place anything on top of the cabinet. The top
ventilation holes must be unobstructed for the proper
operation of the unit and to prolong the life of its
components.
On cleaning the cabinet
Clean the cabinet, panel and controls with a soft cloth
lightly moistened with mild detergent solution. Do not use
any type of abrasive pad, scouring powder or solvent such
as alcohol or benzine.
On repacking
Do not throw away the carton and the packing material. It
makes an ideal container to transport the unit in.
lf you have any question or problem concerning your unit,
please consult your nearest Sony dealer.
For detailed precautions, see the leaflet "IMPORTANT
SAFEGUARD*.
PAVOVLUES} lave miayewAelolce)
The following operations apply only to reproduced
sound.
Volume Adjustment
To increase the sound level, turn the VOLUME clockwise.
To decrease it , turn the control counterclockwise.
Note
When listening with headphone connected to the
HEADPHONES jack, no sound can be heard from the
speaker system.
SToLUraToM@lUr-]iham-Nejlerssdaatcvals
To adjust tone quality
Adjust the 5-BAND STEREO GRAPHIC EQUALIZER
controls according to:
© Personal preference
¢ The room acoustics. For instance, playback in a room
with padded walls or furniture will probably sound better
with the high frequencies boosted.
¢ Program quality. If reproduction contains hiss, cutting
the higher frequencies will improve playback.
Function of the graphic equalizer controls
100 Hz: Boosts or cuts bass.
330 Hz: Adjusts the power, spaciousness and warmth of
the sound.
1kHz:
Provides more presence for vocals.
3.3 kHz: Boosts a brighter sound or reduces stridency.
10 kHz: Highlighis the delicate quality of instrumental
sound.
Balance Adjustment
To change relative strength of the right and left speaker
outputs, adjust the BALANCE control.
For personal listening
Connect headphone to the HEADPHONES jack.