Sony SRS-X88 Інструкція з експлуатації Посібник з експлуатації - Сторінка 15

Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Стереосистема Sony SRS-X88. Sony SRS-X88 28 сторінок. Personal audio system
Також для Sony SRS-X88: Посібник із запуску (2 сторінок), Інструкція з експлуатації Посібник з експлуатації (41 сторінок), Посібник з експлуатації (40 сторінок), Посібник із запуску (2 сторінок)

Sony SRS-X88 Інструкція з експлуатації Посібник з експлуатації

Listening to music via a Wi-Fi network

Selecting the method of
network connection
If you connect this unit to a network, you
can enjoy this unit in various ways.
Depending on your network environment,
setting up methods are different. Select the
appropriate connecting method for your
network environment from below.
Tip
For setting the fixed IP address, use the screen in
step 6 of "Connecting with a PC" (page 15).
Note
Connecting to a Wi-Fi network and a wired
network simultaneously is not possible. When you
connect to a Wi-Fi network, be sure to disconnect
the LAN cable from the unit.
Method for using a smartphone/
iPhone
Install the SongPal application for your
smartphone/iPhone. For details, refer to the
Wi-Fi Startup Guide (separate document).
Method for using a wireless router
with a WPS (AOSS) button
Use the WPS button to connect. For details,
refer to the Wi-Fi Startup Guide (separate
document).
Method for using a PC
See "Connecting with a PC" (page 15).
Method for using a wired network
 Refer to Help Guide for details.
http://rd1.sony.net/help/speaker/srs-x88/h_zz/

Connecting with a PC

If your wireless router does not have a WPS
(AOSS) button, configure Wi-Fi settings by
connecting the unit to your PC with a LAN
cable.
Prepare a commercially-available LAN cable
beforehand.
Tip
When setting up a Wi-Fi network, the SSID (Wi-Fi
Network Name) and security key (WEP or WPA key)
may be required. The security key (or network key)
uses encryption to limit the devices with which
communication can occur. It is used to provide
higher security for devices communicating via a
wireless router/access point.
1
Record the SSID and password of
your router.
For details, refer to the operating
instructions of your router.
SSID (Wi-Fi Network Name)
Password (Security Key)
2
Connect the unit to the PC with a
LAN cable directly.
LAN cable
(not supplied)
Use a commercially-available LAN cable
to connect.
15
GB