Sony STR-DA2000ES - Fm Stereo/fm-am Receiver Технічна інформація - Сторінка 5
Переглянути онлайн або завантажити pdf Технічна інформація для Стереосистема Sony STR-DA2000ES - Fm Stereo/fm-am Receiver. Sony STR-DA2000ES - Fm Stereo/fm-am Receiver 33 сторінки. Limited warranty (es products)
Також для Sony STR-DA2000ES - Fm Stereo/fm-am Receiver: Інформація про розміри (1 сторінок), Технічна інформація (38 сторінок), Обмежена гарантія (1 сторінок)
Друкувати сторінку
In high fidelity components, the simplest solution is usually the best
because it subjects the signal to the fewest distortion-causing processes.
Unfortunately, conventional A/V receivers are anything but simple. After Digital
Signal Processing (DSP), every signal needs to be converted back to analog, run
through a Low Pass Filter (LPF), sent through an analog volume control and then
amplified.
Input
(Digital)
Digital Signal
The conventional A/V receiver is anything but simple. The signal must
run through a gantlet of processes and stages.
The Sony S-Master Pro amplifier is dramatically different. There is no
Digital-to-Analog (D/A) converter. Instead, the amplifier accepts the digital output
of the DSP stage directly. The output of the S-Master Pro amplifier provides the
wattage that drives the speakers. In this way, the signal remains digital until the
last possible instant.
Input
(Digital)
Digital Signal
The Sony S-Master Pro amplifier dramatically simplifies receiver design.
And in high fidelity, simpler is better.
The S-Master Pro amplifier accepts all digital signals directly, whether
they're multi-bit Pulse Code Modulation (PCM) or 1-bit Direct Stream Digital™
pulses, in the case of the SCD-XA9000ES SA-CD player connected via i.LINK®
interface to the STR-DA9000ES. Analog inputs undergo Analog-to-DSD
(A/DSD) conversion.
ES Receivers V3.0
D/A
DSP
LPF
convert
S-Master
DSP
Power Amplifier
Principle of operation
Analog
Volume
Speaker
Power
Control
Output
Amp
Analog Signal
Speaker
LPF
Output
Analog Signal
Page 5