Sony STR-DA3100ES - Fm Stereo/fm-am Receiver Технічна інформація - Сторінка 12

Переглянути онлайн або завантажити pdf Технічна інформація для Стереосистема Sony STR-DA3100ES - Fm Stereo/fm-am Receiver. Sony STR-DA3100ES - Fm Stereo/fm-am Receiver 38 сторінок. Limited warranty (es products)
Також для Sony STR-DA3100ES - Fm Stereo/fm-am Receiver: Технічні характеристики (2 сторінок), Посібник з простого налаштування (2 сторінок), Технічні характеристики (2 сторінок), Обмежена гарантія (1 сторінок)

Semiconductor Field Effect Transistors (MOS FETs), four per channel, for the

STR-DA7100ES. The result is another measure of signal integrity.

A detail of the power amplifier circuit board of the STR-DA7100ES. The

twelve black chips are the MOS FET output transistors for three

channels (4 MOS FETs per channel).

Sony output transistors are remarkable for their internal wiring and

bonding, their unique packaging and the way they're configured on the power

amplifier circuit board. Consider the packaging.

Conventional output transistors have two distinct sides. The bottom is

designed to radiate heat, and is usually attached to a metal heat sink. The top is

fashioned from molded plastic, from which heat cannot escape. No matter how

much cooling may be available at the top, the plastic package is too thick to

conduct heat away from the transistor.

On the left, the MOS FET output transistor used in Sony's STR-

DA9000ES was 2 to 3 mm thick. At right, the MOS FETs used in the

DA7100ES is 1 mm thick or less, for far better dissipation of heat.

ES Receivers v1.0

MOS FET Thermal Packaging

Page 12