Sony Walkman MZ-R900 Посібник з експлуатації - Сторінка 23
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Стереосистема Sony Walkman MZ-R900. Sony Walkman MZ-R900 50 сторінок. Service manual
Також для Sony Walkman MZ-R900: Інструкція з експлуатації Посібник з експлуатації (20 сторінок), Технічні характеристики (2 сторінок), Обмежена гарантія (1 сторінок), Інструкція з експлуатації Посібник з експлуатації (13 сторінок)
Друкувати сторінку
[VOL+]
20. Press the
key once to change the blinking portion to
0D60.
Remote commander LCD display
023
:Adjusted value
21. Press the
key.
x
(00 is blinking)
[VOL+]
22. Adjust with the
key (adjusted value up) or
key (adjusted value down) so that the adjusted value becomes
08.
Remote commander LCD display
023
:Adjusted value
23. Press the
X
key.
(0D60 is blinking)
[VOL+]
24. Press the
key once to change the blinking portion to
0D61.
Remote commander LCD display
023
:Adjusted value
25. Press the
key.
x
(00 is blinking)
[VOL+]
26. Adjust with the
key (adjusted value up) or
key (adjusted value down) so that the adjusted value becomes
A1.
Remote commander LCD display
023
:Adjusted value
27. Press the
X
key.
(0D61 is blinking)
[VOL+]
28. Press the
key once to change the blinking portion to
0D62.
Remote commander LCD display
023
:Adjusted value
29. Press the
key.
x
(00 is blinking)
[VOL+]
30. Adjust with the
key (adjusted value up) or
key (adjusted value down) so that the adjusted value becomes
04.
Remote commander LCD display
023
:Adjusted value
31. Press the
key.
X
(0D62 is blinking)
[VOL+]
32. Press the
key once to change the blinking portion to
0D65.
Remote commander LCD display
023
:Adjusted value
33. Press the
x
key.
(00 is blinking)
34. Adjust with the
key (adjusted value down) so that the adjusted value becomes
20.
Remote commander LCD display
023
:Adjusted value
35. Press the
X
[VOL--]
(0D65 is blinking)
[DISPLAY]
36. Press the
eral seconds (about 3 seconds) to exit the patch data write mode
(to return to the manual mode display in the test mode).
Remote commander LCD display
023
:Adjusted value
37. Press the
X
changes to CC)
38. The modified data writing is over, if the adjusted value changes
to DD.
Remote commander LCD display
023
:Adjusted value
39. Turn the power off.
[VOL--]
• Modified Data Writing Method (version 1.100)
1. Select the manual mode of the test mode, and set item number
022 (see page 13).
Remote commander LCD display
022
2. Press the
X
(The modified data writing is over, if the adjusted value changes
to DD)
Remote commander LCD display
022
:Adjusted value
3. Press the
N
Remote commander LCD display
023
[VOL--]
:Adjusted value
[VOL+]
4. Press the
[DISPLAY]
5. Press the
eral seconds (about 3 seconds) to activate the patch data write
mode.
(The following display will appear where 00 is blinking)
Remote commander LCD display
023
:Adjusted value
6. Press the
X
(0D5C is blinking)
[VOL+]
7. Press the
0D5D.
Remote commander LCD display
023
:Adjusted value
[VOL+]
key (adjusted value up) or
key.
key on the remote commander for sev-
key to write the modified data. (The adjusted value
key to initialize the patch data.
key or
key to set item number 023.
>
key once to change the adjusted value to 01.
key on the remote commander for sev-
key.
key once to change the blinking portion to
MZ-R900
[VOL--]
23