Sony XDR-S100CD Інструкція з експлуатації - Сторінка 2
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Стереосистема Sony XDR-S100CD. Sony XDR-S100CD 2 сторінки. Dab/fm/cd audio system
Друкувати сторінкуPausing and rewinding radio
Other useful functions
This unit always stores DAB data and you can pause and
for DAB
rewind the data. When the memory becomes full, new
audio data will over write from the oldest one.
1
Changing the display
Press PAUSE & REWIND during DAB
reception.
To change the display mode, press DISPLAY during DAB
The current broadcast mutes and the PAUSE &
reception.
REWIND indicator and the rewind time* appear in
The display can be up to 16 characters. Each time you
the display.
press DISPLAY, the bottom of the display changes as
follows:
* Rewind time: delay time from the current broadcast
2
Press PAUSE & REWIND again until the
desired rewind time appears.
You can also rewind the current broadcast by holding
down ( on the remote). You can adjust
the rewind time by holding down or
( or on the remote).
The operation is cancelled when you:
Change channels.
Select ALL on the GUIDE DOWNLOAD menu.
Press or POWER.
: Dynamic
Hold down ( on the remote) until the
: Signal strength and PTY
rewind time displays "0:00" (current time).
: Ensemble
Change a function.
: Frequency and bit rate
: Clock and date
Notes
When EPG is displayed, this operation is disabled. In
Note
this case, , can not be operated.
The display mode returns to after several seconds.
Rewind time is depending on bit rate of broadcast.
The display mode will be also displayed when you
128kbps DAB data is storable for about 25 minutes.
turn the unit off and on again, or change to another
If DAB reception is poor, this function may not operate
function.
properly.
When the memory becomes full during pause mode,
Using the GUIDE
this function will be playback automatically.
This unit downloads the EPG (electronic programme
guide) included in the DAB data and displays it. The unit
also enables you to perform timer operations, using the
PTY (Programme type)
downloaded EPG (see "Setting the guide timer").
To download the EPG
This function indicates services by programme type, such
1
Follow steps 1 to 3 in "Operating the radio"
as NEWS, SPORTS, etc., in the PTY list, transmitted as
DAB.
and tune into DAB service.
2
Press GUIDE for more than 2 seconds.
If the received service or station does not transmit the
programme type, "None" appears.
"GUIDE DOWNLOAD" appears in the display.
3
Turn TUNING/SELECT to select the
Programme type
Display
"CURRENT" or "ALL. "
Undefined
None
"CURRENT": Only the current station is
News
News
downloaded.
"ALL": All stations are downloaded in order.
Current Affairs
Affairs
4
Press ENTER.
Information
Info
"GUIDE DOWNLOADING" flashes in the display
Sport
Sport
until "%" and current ensemble name appears.
Education
Educate
Drama
Drama
When download is completed, the EPG is displayed as
follows:
Culture
Culture
Science
Science
Varied
Varied
Pop Music
Pop M
Rock Music
Rock M
Easy Listening Music
Easy M
Light Classical
Light M
Day of the week
Serious Classical
Classics
Component (or secondary) label
Other Music
Other M
Programme name
Weather
Weather
Programme start time
Finance
Finance
(currently broadcast programme is
Children's programmes
Children
displayed as "NOWPLAYING")
Programme end time
Social Affairs
Social
Religion
Religion
To display the EPG:
Phone In
Phone In
Press GUIDE.
To display the media description in EPG:
Travel
Travel
Press DISPLAY.
Leisure
Leisure
To check another station in EPG:
Jazz Music
Jazz
Turn TUNING/SELECT.
To check another programme time in EPG:
Country Music
Country
Press SCAN + or –.
National Music
National M
To store the guide timer:
Oldies Music
Oldies
Press ENTER.
Folk Music
Folk M
Notes
Documentary
Document
Set this unit to receive DAB for about 2 minutes so as
to download the EPG data.
If DAB reception is poor, time-out error may occur
while downloading the EPG data.
Perform the above operation where the reception is
good.
If you move into a place with poor reception (in the
building, etc.) after downloading the EPG, EPG may
not be displayed.
If there is no data, or data cannot be displayed, "Not
Available" appears in the display.
The downloaded EPG data will be erased if the either
of the following operations is executed:
–When you operate the power saving mode.
–When you turn off the unit during battery operation.
Playing tracks repeatedly
Playing a CD
(repeat play)
You can play tracks repeatedly in normal, shuffle or
program play modes.
Insert a disc
with the label
1
Follow steps 1 and 2 in "Playing a CD"
side facing
2
Proceed as follows:
forward.
To repeat
A single track
Rewind
time
All tracks on the
CD
Tracks in
1
Press CD on the unit.
random order
2
Slot the CD into the unit.
Total tracks and time appear in the display.
3
Press ( on the remote).
Programmed
The unit plays all the tracks once.
tracks files
To
Press
Pause playback
( or on the
remote)
Stop playback
To cancel repeat play
Go to the next track
Turn TUNIG/SELECT or
Press REPEAT on the remote until "REPEAT" disappears
press ( on
from the display.
the remote)
Playing tracks in random order
Turn TUNIG/SELECT or
Go back to the previous
press ( on
track
(shuffle play)
the remote)
You can play tracks in random order.
Locate a point while
(forward) or
listening to the sound
(backward)
1
Follow steps 1 and 2 in "Playing a CD"
( or on the
2
Press MODE until "SHUFFLE" appears in the
remote) while playing and
display.
hold it until you find the
3
Press ( on the remote) to start shuffle
point.
play.
Locate a point while
(forward) or
(backward)
observing the display
To cancel Shuffle Play
( or on the
Stop playing first. Then press MODE until "SHUFFLE"
remote) in pause and hold
disappears from the display.
it until you find the point.
Tip
Remove the CD
During shuffle play, you cannot select the previous track
by pressing ( on the remote).
About CD-Rs/CD-RWs
This unit is compatible with CD-Rs/CD-RWs but
Creating your own programme
playback capability may vary depending on the quality of
(programme play)
the disc, the recording device and application software.
You can arrange the playing order of up to 20 tracks on a CD.
Music discs encoded with copyright protection
technologies
1
Follow steps 1 and 2 in "Playing a CD"
This product is designed to play back discs that conform
2
Press MODE until "PROGRAM" appears in
to the Compact Disc (CD) standard.
the display.
Recently, various music discs encoded with copyright
3
Press or or turn
protection technologies are marketed by some record
companies. Please be aware that among those discs, there
TUNING/SELECT to select the track and then
are some that do not conform to the CD standard and
press ENTER to add it to the programme.
may not be playable by this product.
Repeat to programme other tracks in the order that
To handle compact discs
you want.
After programming the first track, "STEP 1" appears,
Correct
followed by selected track.
Each time you add a track, a step number is added.
4
Press ( on the remote) to start
Handle the disc by its edge.
Programme Play.
To cancel programme play
Stop playing first. Then press MODE until "PROGRAM"
disappears from the display.
Incorrect
To clear the programme you set
Press CLEAR on the remote.
Do not touch the surface.
Stop playback first. Then press STOP .
Tip
You can play the same programme again, since the
programme is saved until you eject the CD.
Do not stick paper or
tape on the surface.
Connecting optional
component
Note on DualDiscs
A DualDisc is a two sided disc product which mates DVD
recorded material on one side with digital audio material
To enhance your system, you can connect optional
on the other side. However, since the audio material side
components. Be sure to turn off the power of each
does not conform to the Compact Disc (CD) standard,
component before making any connections. For details, refer
playback on this product is not guaranteed.
to the instruction manual of the component to be connected.
Notes
To listen to the sound from optional
Discs with non-standard shapes (e.g., heart, square,
components in the unit
star) cannot be played on this unit. Attempting to do so
may damage the unit. Do not use such discs.
1
Connect the AUDIO IN jack on the unit to
To prevent a CD from being damaged while inserting/
the line output jack of the portable digital
removing it, set the carrying handle down when
music player or other components using an
playing a CD.
audio connecting cable* (not supplied).
When you eject a disc, handle the disc by its edge. Do
* For a PC: use a cable which fills the connector of
not touch the surface.
your PC. For a TV or VCR: use a cable with a stereo-
Using the display
mini plug on one end and two phono plugs on the
other end. For a portable digital music player: use a
To check the total track number and playing time
cable with a stereo-mini plug on both ends.
2
In stop mode, press DISPLAY.
Turn the unit and the connected component on.
3
Press AUDIO IN and start playing sound on
To check the remaining time
the connected component.
Press DISPLAY repeatedly while playing a CD.
The sound from the connected component is output
The display changes as follows:
from the speakers.
The current track number and playing time
To listen to the sound of the unit by optional
components
The current track number and the remaining time of the
current track
Connect the LINE OUT jack on the unit to the line in
jack of the other components.
The number of tracks left and remaining time on the CD
Note
The volume and tone adjusted on this unit does not
Clock display (current time)
affect the sound output from LINE OUT.
Using the timers
The unit offers three timer functions. If you use the
alarm timer or guide timer with the sleep timer, the sleep
timer has priority.
Setting the sleep timer
The sleep timer allows you to fall asleep to the sound of a
Do this
CD, the radio, or input from the AUDIO IN function. It
1
Press REPEAT on the remote until
does this by automatically turning off the CD, the radio, or
"REPEAT 1" appears.
input from the AUDIO IN function after a preset duration.
2
Press or to
1
select the track that you want to
Press SLEEP while the unit is turned on.
repeat.
"SLEEP" appears in the display.
3
Press ( on the remote).
2
Press SLEEP to set the sleep timer duration.
1
Press REPEAT on the remote until
Each time you press SLEEP, the duration changes as
"REPEAT" appears.
follows:
2
Press ( on the remote).
"AUTO*" "60" "30" "20" "10" "OFF".
1
Start shuffle play (see "Playing
* When you select "AUTO, " the CD stops playing in
tracks in random order").
90 minutes at most and the unit goes off
2
Press REPEAT on the remote until
automatically. When you are listening to the radio,
"REPEAT" appears.
the radio goes off in 90 minutes.
3
Press ( on the remote).
1
Program tracks (see "Creating
The unit automatically turns off when the duration time
your own programme").
is passed.
2
Press REPEAT on the remote until
4 seconds after you have finished the duration setting
"REPEAT" appears.
and released SLEEP, "SLEEP" appears in the display and
3
Press ( on the remote).
back light will turn off, then the sleep timer starts. The
unit will play for the duration you set, and then shut off.
Note
Even if the duration is passed, the optional component
connected with AUDIO IN is not turned off.
To change the sleep timer setting
Repeat step 2 to select the desired sleep timer setting
even after the sleep timer has been activated.
To deactivate the sleep timer
Press POWER. The unit will turn off.
Press SLEEP to set the sleep timer "OFF, " only the sleep
timer will be cancelled (the unit stays ON).
Setting the alarm timer
You can set the unit to turn on automatically at a preset time.
The timer sound is selectable from DAB, FM, CD and
BUZZER.
Make sure you have set the clock.
To set the alarm timer
1
Press MENU to show the menu display.
2
Turn TUNING/SELECT ( or on the
remote) to select "TIMER SETTING, " then
press ENTER.
3
Turn TUNING/SELECT ( or on the
remote) to select "TIMER A, " then press
ENTER.
4
Turn TUNING/SELECT ( or on the
remote) to select "SETTING, " then press
ENTER.
5
Turn TUNING/SELECT ( or on the
remote) to set the hour for on time, then press
ENTER.
The minute flashes. Perform the procedure above to
set the minute.
6
Repeat step 5 to set the time to stop playing.
7
Turn TUNING/SELECT ( or on the
remote) to select the desired sound from DAB,
FM, CD and BUZZER, then press ENTER.
8
Turn TUNING/SELECT ( or on the
remote) to adjust the wake-up volume, then
press ENTER.
If you select DAB or FM, turn TUNING/SELECT
( or on the remote) to select the desired
preset number, then press ENTER.
When you select the preset number "P--" during
DAB service reception, the most recent reception
service is received.
9
Press POWER to turn off the unit.
The unit turns on about 15 seconds before the preset
time.
If the unit is on at the preset time, the alarm timer
will not play.
To stop the alarm timer
Press POWER.
To deactivate the alarm timer
Perform the same procedure as in step 4 to select "OFF. "
"TIMER" and "A" turn off in the display.
Setting the guide timer
To set the guide timer
You can set up to 10 guide timers using the EPG display
based on the downloaded DAB data.
Make sure you have download the EPG.
1
Follow steps 1 and 2 in "To set the alarm
timer. "
2
Turn TUNING/SELECT ( or on the
remote) to select "GUIDE, " then press ENTER.
EPG appears in the display. "TIMER, " "B, " "GUIDE"
and the lowest number of the guide timer on which a
programme is not stored flash in the display.
3
Turn TUNING/SELECT ( or on the
Precautions
remote) and press SCAN + or – to select the
desired programme, then press ENTER.
Operate the unit only on the power sources specified in
4
Turn TUNING/SELECT ( or on the
"Specifications". For battery operation, use six R14 (size
remote) to adjust the volume, then press
C) batteries. For AC operation, use only the supplied
ENTER.
AC power adaptor. Do not use any other type of AC
power adaptor.
If you select the stored number in step 2, do the
The unit is not disconnected from the AC power
following:
source (mains) as long as it is connected to the wall
1
outlet, even if the unit itself has been turned off.
Turn TUNIG/SELECT ( or on the
Use the unit within a temperature range of 0°C to 40°C
remote) and press SCAN + or – to select the
(32°F to 104°F). If it is used in temperatures higher
desired programme, then press ENTER.
than this range, numbers may appear in the display
"SETTING" and "CANCEL" appear in the display.
which have nothing to do with the frequency being
2
Turn TUNIG/SELECT ( or on the
received. If it is used in temperatures lower than this
remote) to select "SETTING, " then press
range, the numbers displayed may change very slowly.
ENTER.
(These irregularities will disappear and there will be no
3
damage to the unit when the unit is used in the
Turn TUNIG/SELECT ( or on the
recommended temperature range.)
remote) to adjust the volume, then press
Avoid exposure to temperature extremes, direct
ENTER.
sunlight, moisture, sand, dust or mechanical shock.
Never leave in a car parked in the sun.
The setting is completed.
Should any solid object or liquid fall into the unit,
disconnect the AC power adaptor and remove the
To erase the guide timer
batteries, and have the unit checked by a qualified
personnel before operating it any further.
1
Perform the same procedure as in steps 1 and
Do not drop objects such as clips or coins into the CD
2 in "To set the guide timer, " turn TUNING/
slot. If this happens, disconnect the AC power adaptor
SELECT ( or on the remote) to
and remove the batteries, and have the unit checked by
a qualified personnel before operating it any further.
select the desired number and then press
Be careful of objects/people around you when carrying
ENTER.
the unit by its handle.
"SETTING" and "CANCEL" appear in the display.
In vehicles or buildings, radio reception may be
2
Turn TUNING/SELECT ( or on the
difficult or noisy. Try listening near a window.
remote) to select "CANCEL, " then press
Since a strong magnet is used for the speakers, keep
ENTER.
away personal credit cards using magnetic coding or
spring-wound watches from the unit to prevent
To set the guide timer directly by EPG.
possible damage from the magnet.
1
Following "To display the EPG" and display
To clean the casing, use a soft cloth dampened with a
the desired EPG to setting the timer.
mild detergent solution.
2
Press ENTER.
Disposal of Old Electrical & Electronic
"TIMER, " "B, " "GUIDE" and the lowest number of
Equipment (Applicable in the
the guide timer on which a programme is not stored
European Union and other European
flash in the display.
countries with separate collection
3
Turn TUNING/SELECT ( or on the
systems)
remote) to adjust the volume, then press
This symbol on the product or on its
ENTER.
packaging indicates that this product
shall not be treated as household waste. Instead it shall be
Notes
handed over to the applicable collection point for the
You cannot set the guide timer if the following
recycling of electrical and electronic equipment. By
indications appear.
ensuring this product is disposed of correctly, you will
– "TIMEOVERLAPPING": On-time of two or more
help prevent potential negative consequences for the
guide timers overlap.
environment and human health, which could otherwise
– "TIMER NG": The on-time and off-time are the
be caused by inappropriate waste handling of this
same.
product. The recycling of materials will help to conserve
– "TIMER FULL": Maximum numbers of guide timers
natural resources. For more detailed information about
have been already set.
recycling of this product, please contact your local Civic
If a guide timer activates while the power is turned on,
Office, your household waste disposal service or the shop
the power is not turned off when the off-time of the
where you purchased the product.
guide timer passes.
Applicable accessories: Remote control
If another guide timer activates while a guide timer
sounds, the latter one has priority.
Disposal of waste batteries
If the on-time of the alarm timer and guide timer is
(applicable in the European Union
same, guide timer has priority.
and other European countries with
separate collection systems)
This symbol on the battery or on the
Other useful functions
packaging indicates that the battery provided with this
product shall not be treated as household waste. By
ensuring these batteries are disposed of correctly, you
Adjusting the tone
will help prevent potentially negative consequences for
1
Press POWER to turn on the unit.
the environment and human health which could
2
Press MENU to show the menu display.
otherwise be caused by inappropriate waste handling of
3
the battery. The recycling of the materials will help to
Turn TUNING/SELECT to select "TONE
conserve natural resources.
CONTROL, " then press ENTER to show the
In case of products that for safety, performance or data
setting display.
4
integrity reasons require a permanent connection with
Turn TUNING/SELECT to adjust "TREBLE, "
an incorporated battery, this battery should be replaced
then press ENTER.
by qualified service staff only. To ensure that the battery
5
Turn TUNING/SELECT to adjust "BASS, " then
will be treated properly, hand over the product at end-of-
press ENTER.
life to the applicable collection point for the recycling of
electrical and electronic equipment.
Tips
For all other batteries, please view the section on how to
The adjustable range of "TREBLE" and "BASS" is from
remove the battery from the product safely. Hand the
–4 to +4.
battery over to the applicable collection point for the
You can adjust "TONE" directly by pressing TONE on
recycling of waste batteries.
the remote control. Press or to adjust the
tone, then press ENTER.
For more detailed information about recycling of this
product or battery, please contact your local Civic Office,
Using the power saving mode
your household waste disposal service or the shop where
you purchased the product.
This unit has a power saving mode in AC operation.
While the AC power adaptor is connected in power off,
If you have any questions or problems concerning
press DISPLAY for more than 2 seconds.
your unit, please consult your nearest Sony dealer.
The following will occur:
Time display is turned off
Remote control does not work
EPG is all erased
To reset the unit
If the radio fails to function properly, do the following:
Press and hold STOP, ENTER and POWER at the same
time for a few seconds.
"RESET" appears in the display and the unit will revert
to the factory preset.
Troubleshooting
Should any problem persist after you have made the
following checks, consult your nearest Sony dealer.
Display is dim, or no indication is displayed.
The unit is being used in extremely high or low
temperatures or in a place with excessive moisture.
Very weak or interrupted sound, or unsatisfactory
reception.
If you are in a building, listen near a window.
A station or service cannot be received when a
PRESET recalls.
The station or service has not been preset.
Another station or service is preset. Preset the station
or service again.
The preset services and stations may be initialized, if a
maintenance service is performed.
Please note down of your settings in case you want to
preset them again.
Specifications
CD player section
System
Compact disc digital audio system
Laser diode properties
Emission duration: Continuous
Laser output: Less than 44.6 µW(This output is the value
measurement at a distance of 200 mm from the objective
lens surface on the optical pick-up block with 7 mm
aperture.)
Number of channels
2
Frequency response
20 - 20 000 Hz +1/–2 dB
Wow and flutter
Below measurable limit
Radio section
Frequency range
Band
Frequency
Channel step
DAB (Band-III) 174.928 - 239.200 MHz
FM
87.5 - 108 MHz
0.05 MHz
DAB (Band-III) frequency table
(MHz)
No. Channel Frequency No. Channel Frequency
1
5A
174.928
20
9D
208.064
2
5B
176.640
21
10A
209.936
3
5C
178.352
22
10B
211.648
4
5D
180.064
23
10C
213.360
5
6A
181.936
24
10D
215.072
6
6B
183.648
25
11A
216.928
7
6C
185.360
26
11B
218.640
8
6D
187.072
27
11C
220.352
9
7A
188.928
28
11D
222.064
10
7B
190.640
29
12A
223.936
11
7C
192.352
30
12B
225.648
12
7D
194.064
31
12C
227.360
13
8A
195.936
32
12D
229.072
14
8B
197.648
33
13A
230.784
15
8C
199.360
34
13B
232.496
16
8D
201.072
35
13C
234.208
17
9A
202.928
36
13D
235.776
18
9B
204.640
37
13E
237.488
19
9C
206.352
38
13F
239.200
General
Time display
24-hour system
Speaker:
Approx. 7.7 cm (3
1
⁄
in) dia. 6 Ω
8
Power output:
3W + 3 W (at 10 % harmonic distortion)
Output:
(headphones) jack (ø 3.5mm stereo mini jack)
LINE OUT jack (ø 3.5mm stereo minijack)
Input:
AUDIO IN jack (ø 3.5mm stereo minijack)
Power requirements:
9 V DC, six R14 (size C) batteries
External power source:
DC IN 9 V
Dimensions:
Approx. 339 × 200 × 158 mm (w/h/d)
(Approx. 13
⁄
× 7
⁄
× 6
⁄
in) incl. projecting parts
3
7
1
8
8
4
and controls
Mass:
Approx. 3.8 kg (8 lb 6 oz) not incl. batteries
Supplied accessories:
AC power adaptor (1)
Remote control (1)
Design and specifications are subject to change without
notice.