Sony ZS-BTY52 Інструкція та посібник з експлуатації

Переглянути онлайн або завантажити pdf Інструкція та посібник з експлуатації для Стереосистема Sony ZS-BTY52. Sony ZS-BTY52 2 сторінки. Personal audio system

Друкувати сторінку

PERSONAL AUDIO SYSTEM

Operating Instructions

Printed in China

ZS-BTY52

WARNING

To reduce the risk of fire or electric shock, do

Europe only

not expose this apparatus to rain or moisture.

Disposal of waste batteries

To reduce the risk of fire or electric shock, do not

(applicable in the European

expose this apparatus to dripping or splashing,

Union and other European

and do not place objects filled with liquids, such

countries with separate

as vases, on the apparatus.

collection systems)

As the main plug is used to disconnect the unit

This symbol on the battery or on the packaging

from the mains, connect the unit to an easily

indicates that the battery provided with this

accessible AC outlet. Should you notice an

product shall not be treated as household waste.

abnormality in the unit, disconnect the main plug

On certain batteries this symbol might be used in

from the AC outlet immediately.

combination with a chemical symbol. The

chemical symbols for mercury (Hg) or lead (Pb)

The unit is not disconnected from the AC power

are added if the battery contains more than

source (mains) as long as it is connected to the

0.0005% mercury or 0.004% lead. By ensuring

wall outlet, even if the unit itself has been turned

these batteries are disposed of correctly, you will

off.

help prevent potentially negative consequences

Do not install the appliance in a confined space,

for the environment and human health which

such as a bookcase or built-in cabinet.

could otherwise be caused by inappropriate

waste handling of the battery. The recycling of

Excessive sound pressure from earphones and

the materials will help to conserve natural

headphones can cause hearing loss.

resources.

Do not expose the batteries (battery pack or

In case of products that for safety, performance

batteries installed) to excessive heat such as

or data integrity reasons require a permanent

sunshine, fire or the like for a long time.

connection with an incorporated battery, this

The nameplate is located on the bottom exterior.

battery should be replaced by qualified service

staff only. To ensure that the battery will be

Notice for customers: the

treated properly, hand over the product at

following information is only

end-of-life to the applicable collection point for

the recycling of electrical and electronic

applicable to equipment sold

equipment.

in countries applying EU

For all other batteries, please view the section on

how to remove the battery from the product

directives

safely. Hand the battery over to the applicable

This product has been manufactured by or on

collection point for the recycling of waste

behalf of Sony Corporation, 1-7-1 Konan

batteries.

Minato-ku Tokyo, 108-0075 Japan. Inquiries

For more detailed information about recycling of

related to product compliance based on

this product or battery, please contact your local

European Union legislation shall be addressed to

Civic Office, your household waste disposal

the authorized representative, Sony Deutschland

service or the shop where you purchased the

GmbH, Hedelfinger Strasse 61, 70327 Stuttgart,

product.

Germany. For any service or guarantee matters,

Licence and Trademark Notice

please refer to the addresses provided in the

separate service or guarantee documents.

 MPEG Layer-3 audio coding technology and

For customers in Europe and

patents licensed from Fraunhofer IIS and

Thomson.

Australia

 Windows Media is either a registered

trademark or trademark of Microsoft

Disposal of Old Electrical &

Corporation in the United States and/or other

countries.

Electronic Equipment

(Applicable in the European

 This product contains technology subject to

Union and other European

certain intellectual property rights of Microsoft.

Use or distribution of this technology outside

countries with separate

collection systems)

of this product is prohibited without the

appropriate license(s) from Microsoft.

This symbol on the product or on its packaging

 The Bluetooth word mark and logos are owned

indicates that this product shall not be treated as

household waste. Instead it shall be handed over

by the Bluetooth SIG, Inc. and any use of such

to the applicable collection point for the

marks by Sony Corporation is under license.

recycling of electrical and electronic equipment.

 The N Mark is a trademark or registered

By ensuring this product is disposed of correctly,

trademark of NFC Forum, Inc. in the United

you will help prevent potential negative

States and in other countries.

consequences for the environment and human

 Android is a trademark of Google Inc.

health, which could otherwise be caused by

 All other trademarks and registered trademarks

inappropriate waste handling of this product.

are of their respective holders. In this manual,

The recycling of materials will help to conserve

™ and ® marks are not specified.

natural resources. For more detailed information

about recycling of this product, please contact

your local Civic Office, your household waste

disposal service or the shop where you

purchased the product.

Power Sources

Using the AC power cord



Connect the AC power cord

, or insert six R14 (size C) batteries (not supplied) into the battery



compartment

To a wall outlet

To AC IN

AC power cord (supplied)

Notes



 Replace the batteries when the OPR/BATT indicator

dims, or when the unit becomes inoperable. Replace all

the batteries with new ones. Before you replace the batteries, be sure to disconnect any USB device and any

optional component from the unit.

 To use the unit on batteries, disconnect the AC power cord from the unit and the wall outlet.

To use the power-management function (European models only)

This unit is equipped with an automatic standby function. With this function, the unit enters standby

mode automatically in about 20 minutes when there is no operation or audio signal output.



and /ENTER



To turn the standby mode on or off, press DISPLAY

at the same time. Each time you

press the button, "AUTO STANDBY ON" or "AUTO STANDBY OFF" appears on the display.

Notes

 The message "AUTO.STBY" starts flashing on the display about 2 minutes before entering standby mode.

 In standby mode, with the AC power cord connected, "STANDBY" appears on the display.

 The automatic standby function is not available in the FM/AM function.

Basic Operations

4-440-695- 12 (1)

Illumination

The illumination on the handle has the

following two features.

Indication of function change (



)

When you switch to one of four functions, the

illumination increases in intensity to notify

the user of function change. The illumination

is blue for Bluetooth and white for other

functions.



Lighting effects for audio output (

)

Lighting effects, in red, are created that

synchronize with the music source. You can

turn this function on or off as desired (See

"Turning off the light sync function").

Other operations

Before using the unit

Pause playback Press

To turn the power on or off

Press POWER (or OPERATE)



. You can also turn

on the power of this unit using the direct

Stop playback

power-on function (below).

In this manual, operations are mainly explained

using the direct power-on function.

To use the direct power-on function

Select a folder

Press USB



, BLUETOOTH



, RADIO FM/AM



Skip files

or AUDIO IN



while the unit is turned off. The

power turns on directly in the selected function.

Reverse/

Fast-forward

To adjust the volume



Turn VOLUME control

clockwise (+) or counter

clockwise ().

Find a point in

The volume level of this unit is adjustable in

steps from 0 to 31. For the 31st step, "VOL MAX" is

a file

displayed.

To listen through headphones

Remove a USB

Connect headphones to the  (headphones) jack

device



To reinforce the bass

Press MEGA BASS



"MEGA BASS" lights up on the display.

To return to normal sound, press the button

* When playing a VBR MP3/WMA/AAC file, the unit

again.

Tips

Turning off the automatic

 Playback starts from the last played audio file

demonstration (Latin

American models only)

 The total number of folders is displayed when the

Since demonstration mode is enabled by default,

the demonstration will start automatically in the

following cases;

 Only the file number is displayed when playback

 when the unit is turned off.

 when there is no audio output in the USB

 To cancel Resume play (to start playback from the

function.

 when the Bluetooth connection is not

established in the Bluetooth function (when

"NO BT" is displayed).

To turn off the automatic demonstration, press



PLAY MODE

until "DEMO MODE OFF" appears

Note

on the display.

Always pause playback and turn off the USB

function by pressing POWER (or OPERATE)

Note

function button other than USB

Demonstration mode does not function when

the USB device. Removing the USB device without

operating using batteries.

performing this procedure may corrupt the data on

the USB device or damage the USB device itself.

Turning off the light sync

To change play modes

Press PLAY MODE

function

device is playing or paused.

You can select normal play mode (playback in

sequence of all files on the USB device), folder

The light sync function of this unit creates

play mode (" " for all files in the specified folder

lighting effects that synchronize with the music

source. By default, this function is on but you can

on the USB device), repeat play mode (" " for

repeating all files/"

turn it off as desired.

shuffle play mode ("SHUF"). For details, see

"Selecting play mode" on the back page.

Press LIGHT SYNC



until "LIGHT SYNC OFF"

appears on the display.

Notes on the USB device

 It may take a long time before playback starts

 When a USB device is connected, the unit reads all

To turn on the function, press the button again

until "LIGHT SYNC ON" appears while a music

source is being output in any function.

 Do not connect a USB device to the unit through a

Listening to music on a USB

 With some connected USB devices, after an

device

 Operation is not always guaranteed, even if the

You can listen to audio files stored on a USB

 This unit may not support all the functions

device (a digital music player or USB storage

media).

 The playback order on this unit may differ from

Audio files in MP3, WMA and AAC formats* can

be played on this unit.

 Do not save non-MP3/WMA/AAC files or

* Files with DRM (Digital Rights Management)

 During playback, folders that contain no MP3/

online music store cannot be played on this unit. If

you try to play one of these files, the unit plays

the next unprotected audio file.

 The audio formats supported by this unit are as

Compatible USB devices

Compatibility requirements for the USB

devices are as follows. Before using with this

unit, check that your device meets the

requirements.

 Compliance with USB 2.0 (Full Speed)

 Supports Mass Storage mode*

 MP3 PRO format is not supported.

* Mass Storage mode is a mode that allows a

 WMA files encoded in WMA DRM, WMA Lossless

USB device to become accessible to a host

device, enabling file transfers. Most USB

 AAC files encoded in copyright-protected AAC

devices support Mass Storage mode.

 This unit supports the AAC-LC (AAC Low

Connect the USB device to the

(USB)

port



 This unit cannot play audio files on a USB device

Press USB



to turn on the USB function.

If the USB device does not have a volume

label *

"STORAGE DRIVE" scrolls once on the display,

then "xxxFLDR"** appears on the display.

If the USB device has a volume label

The volume label* scrolls once on the display,

then "xxxFLDR"** appears on the display.

* A volume label is a name that you can assign to

 Compatibility with all encoding/writing software is

data storage media or devices.

** "xxx" is the total folder number.

Press 



to start playback.

File number

 Folder names and file names can be displayed

 Displayable characters are uppercase letters (A to

After the folder name and song title are

displayed, the file number and playing

time* appear.

* If the playing time is more than 100 minutes, it

appears as "--:--" on the display.

* /ENTER



has a

 This unit conforms to version 1.0, 1.1, 2.2, 2.3 and

2.4 of the ID3 tag format. When a file has ID3 tag

tactile dot.

information, "song title," "artist name," and "album

name" will be displayed. If a file does not have the

ID3 tag information, the unit displays as follows:

 File name instead of the song title.

 "NO ARTIST" message instead of the artist

name.

 "NO ALBUM" message instead of the album

name.

ID3 tag information can be displayed using up to

32 characters.

Listening to music wirelessly

on a Bluetooth device

Using the Bluetooth connection, you can listen to

music from wirelessly connected Bluetooth

devices such as mobile phones, smartphones,

music players, etc.

This unit supports non-NFC compatible

Bluetooth devices (hereafter "Bluetooth

device(s)") and NFC-compatible smartphones.

Compatible Bluetooth devices

Compatibility requirements for the devices are as

follows. Before using with this unit, check that

your device meets the requirements.

Do this

 Devices must conform to Bluetooth

 

Standard version 3.0.

during playback.

To resume playback, press

 Devices must support A2DP (Advanced

the button again*.

Audio Distribution Profile) and AVRCP

(Audio/Video Remote Control Profile).

Press

 

to pause

playback, and then press

 NFC capability (required only when using

the NFC pairing function of the unit).

POWER (or OPERATE)



BLUETOOTH



, RADIO FM/

For the latest information on compatible

Bluetooth devices, including NFC-compatible



or AUDIO IN



smartphones, check the website below.

Press

(Folder) + or 



For customers in Europe and Russia:

 

 

Press

once.

http://support.sony-europe.com/

You can skip files one by one.

For customers in Latin America:

 

Press and hold down

http://www.sony-latin.com/index.crp

 

. Files will be

For customers in other countries/regions:

skipped continuously until

http://www.sony-asia.com/support

you release the button.

Hold down

 

 

Pairing

during playback, and release

Bluetooth devices must be "paired" with each

the button at the desired

other beforehand. Once Bluetooth devices are

point.

paired, there is no need for pairing again, unless

Press

 

to pause

pairing information is cleared. With this unit, up

playback, and then press

to 9 Bluetooth devices can be paired.

POWER (or OPERATE)



If your device is an NFC-compatible smartphone,



BLUETOOTH

, RADIO FM/

the manual pairing procedure is not necessary.



or AUDIO IN



to turn

Use the smartphone with this unit along with the

off the USB function. Then

procedures described under "To connect with a

remove the USB device.

smartphone by one touch (NFC)."

When using the Bluetooth function, pay

attention to the Bluetooth status indicator ( ) on

may resume playback from a different point.

the display, which tells you the network status

between the unit and your device.

Indications for the Bluetooth function

(Resume play). During pause (Resume stop), the

file number and playing time of the current audio

Status

Bluetooth indicator ( )

file are displayed.

Bluetooth

Off

connection is

reading process is completed and the USB device

off

stops after the device is connected, or after

switching to the USB function from an other

Pairing or

Flashes

function.

communicating

Connection is

Constantly on

of all audio files ends and the USB device stops.

established

beginning of the first MP3/WMA/AAC file), press





to pause playback, and press POWER

(or

To pair with a Bluetooth device

OPERATE)



, BLUETOOTH



, RADIO FM/AM









Keep the Bluetooth device and the unit within 1

or AUDIO IN

. Then, press

to start

playback.

meter of each other for this operation.



Press BLUETOOTH

to turn on the

Bluetooth function.



or a



before removing

Press and hold BLUETOOTH PAIRING

to activate the pairing mode of the unit.

When pairing mode is activated, a

double-beep will sound and the Bluetooth

indicator ( ) will flash on the display.

If activation fails, press and hold BLUETOOTH



repeatedly while the USB

PAIRING



again, and try to activate the

pairing mode again.

To cancel the pairing mode after activation,

press BLUETOOTH PAIRING



seconds.

Perform the pairing procedure on the

1" for repeating one file), or

Bluetooth device.

Turn on the Bluetooth device and activate the

Bluetooth function on your device. For details,

refer to the instruction manual of your

Bluetooth device.

when:

 the folder structure is complex.

When the Bluetooth function of your device is

 the USB device is close to capacity.

activated, your device will search for pairable

devices and display a list of detected devices

the files on the device. If there are many folders or

on the device display. Select this unit from the

files on the device, it may take a long time for the

list. This unit appears as "ZS-BTY50/52/55."

unit to finish reading them.

If "ZS-BTY50/52/55" is not displayed, repeat

the procedure from step 2.

USB hub.

If a passcode is required

operation is performed, there may be a delay

Some Bluetooth devices may require a 4-digit

before it is performed by this unit.

passcode. If your device requires the

passcode, enter "0000."

USB devices meet the compatibility requirements.

When pairing of the device is completed and

provided with a connected USB device.

the Bluetooth connection is established, the

Bluetooth indicator ( ) stops flashing and "BT

the playback order on a connected USB device.

AUDIO" appears on the display.

unnecessary folders to a USB device that contains

MP3/WMA/AAC files.

WMA/AAC files are skipped.

follows:

If you want to pair with another Bluetooth

 MP3: file extension ".mp3"

device, repeat steps 1 to 3.

 WMA: file extension ".wma"

 AAC: file extension ".m4a" and ".mp4"

Notes on pairing with a Bluetooth device

Note that even if the file name has the correct file

 If you turn off the unit or power off the Bluetooth

extension, if the actual file was created in different

device before the Bluetooth connection is

audio format, this unit may produce noise or may

established, pairing information will not be stored,

malfunction.

and pairing will not be completed.

 Pairing mode is canceled after about 5 minutes. If

pairing mode is canceled halfway, start over from

and WMA PRO formats cannot be played back.

step 2.

 The operation and display may differ depending

format cannot be played back.

on the Bluetooth device or the version of

Bluetooth software installed.

Complexity) profile. The HE-AAC (High Efficiency

 "Passcode" may be called "Passkey," "PIN code,"

AAC) profile is not supported.

"PIN number" or "Password," etc., depending on

the Bluetooth device. For details on the passcode,

in the following cases;

refer to the

instruction manual

 when the total number of audio files in a single

folder exceeds 999.

To connect with a smartphone by one

 when the total number of audio files on a single

touch (NFC)

USB device exceeds 65,535.

 when the total number of folders on a single

By touching the unit with an NFC-compatible

USB device exceeds 256 (including the "ROOT"

smartphone, the unit is turned on automatically,

folder).

and then proceeds to complete pairing and the

 when the directory level (folder depths) exceeds

Bluetooth connection automatically.

8 (including the "ROOT" folder).

These numbers may vary depending on the file

and folder structure.

Compatible smartphones

Smartphones with a built-in NFC function

(OS: Android 2.3.3 or later, excluding Android 3.x)

not guaranteed. If audio files on the USB device

were originally encoded with incompatible

software, those files may produce noise or

interrupted sound, or may not be played back at

What is "NFC"?

all.

NFC (Near Field Communication) is a technology

enabling short-range wireless communication

using up to 32 characters, including quotation

between various devices, such as mobile phones

marks.

and IC tags. Thanks to the NFC function, data

communication can be achieved easily just by

Z), numbers (0 to 9) and under score (_). Other

touching the designated touchpoint on the

characters are displayed as "_".

NFC-compatible devices.

Download and install the app "NFC Easy

Listening to the radio

Connect."

"NFC Easy Connect" is a free app for Android

smartphones that can be obtained on Google

Press RADIO FM/AM

Play. Search for the app using the keyword

select the band.

"NFC Easy Connect" on the site, or access the

Each time you press the button, the indication

download site directly by reading the

changes as follows:

two-dimensional code below.

"FM"  "AM"

Note that "NFC Easy Connect" is free but data

Press and hold TUNE + or

communication fees when downloading are

charged separately.

frequency digits begin to change on the

display.

Two-dimensional code* for direct access

* Use a two-dimensional code reader app.

The unit automatically scans the radio

frequencies and stops when it finds a clear

station.

If you cannot tune to a station using the

automatic tuning mode, press TUNE + or 

repeatedly to change the frequency step by

step.

Note

When an FM stereo broadcast is received, "ST"

The App may not be available in some countries

lights up on the display.

and/or regions.

Tip

Start the app "NFC Easy Connect" on the

If the stereo FM reception is noisy, press FM MONO



until "MONO" appears on the display. You will

smartphone.

lose the stereo effect, but the broadcast will

Make sure that the application screen is

improve.

displayed.

Touch the smartphone to the N-marked



part

of the unit until the smartphone

vibrates.

To change the FM/AM tuning interval

Vibration cue is provided

The FM/AM tuning interval can be changed if

when the smartphone is

necessary using the following procedure.

recognized by the unit.

Note that this function is not available on

European, Australian, Taiwan and Latin American

models, except for Uruguay, Paraguay, Peru and

Chile models.

Press RADIO FM/AM

select the band.

Press

"MANUAL," and then press ENTER

"FM-xx" appears on the display.

Press and hold RADIO FM/AM

the current tuning step appears.

Press

desired tuning step.

"FM 50K" (for 50 kHz interval) or "FM 100K" (for

100 kHz interval) in the FM band, and "AM 9K"

After being recognized by the unit, follow the

(for 9 kHz interval) or "AM 10K" (for 10 kHz

on-screen instructions displayed on the

interval) in the AM band can be selected.

smartphone, and complete the procedure for

Press ENTER

Bluetooth connection.

Changing the tuning interval erases all the FM/

When the Bluetooth connection is established,

AM preset stations stored in the unit. Reset your

the Bluetooth indicator ( ) stops flashing and

preset stations after changing the tuning

the message "BT AUDIO" appears on the

interval.

display.

Tip

To improve radio reception

If pairing and the Bluetooth connection fail, do the

 Reorient the antenna to improve FM reception.

following.

 Relaunch "NFC Easy Connect" and move the

smartphone slowly over the N-marked part



 Remove the case from the smartphone if

using a commercially available smartphone

case.

To listen to audio

Keep the Bluetooth device (or NFC-compatible

smartphone) and the unit within 10 meters of

each other, and check the following before

operation.

 The Bluetooth function of the device is

activated.

 Pairing and the Bluetooth connection are

completed correctly. If not, perform the pairing

 Reorient the unit itself to improve AM

procedure beforehand. (See "To pair with a

reception.

Bluetooth device" or "To connect with a

smartphone by one touch (NFC)").

Ą For a Bluetooth device

Press BLUETOOTH



to turn on the

Bluetooth function.

The last connected device will be connected

automatically.



Start playback of an audio source such as

music, videos, games, etc., on the device.

Refer to the instruction manual of your device

for details on playback operations.

Ą For an NFC-compatible smartphone

Start playback of an audio source such as music,

videos, games, etc., on the smartphone.

Refer to the instruction manual of your

at least 2

smartphone for details on playback operations.

Note

The Bluetooth function turns off when:



 you press POWER (or OPERATE)

to turn off

the unit.

 you switch to a function other than Bluetooth

function.

Tip

If the volume level is low, adjust the volume of the

unit first. If the volume level is still too low, adjust

the volume level on the connected Bluetooth device

or the smartphone.

Tip for the Bluetooth devices

If the last connected device does not connect

automatically, reselect the Bluetooth function by



pressing BLUETOOTH

after POWER (or OPERATE)









, USB

, RADIO FM/AM

or AUDIO IN

pressed. If it still does not connect, select the model

name of this unit from the device list (perform step

3 in "To pair with a Bluetooth device").

To terminate a Bluetooth connection

You can terminate the Bluetooth connection

using any of the following operations.

Ą For a Bluetooth device

 Turn off the unit.

 Turn off the device.

 Press POWER (or OPERATE)



, USB



, RADIO

FM/AM



or AUDIO IN



 Disable the Bluetooth function on the device.

Ą For an NFC-compatible smartphone

 Touch the smartphone to the N-marked part



again.

 Turn off the unit.

 Turn off the device.

 Press POWER (or OPERATE)



, USB



, RADIO





FM/AM

or AUDIO IN

 Disable the Bluetooth function on the

smartphone.

To clear the paired device

information stored in the unit

of your device.



Press BLUETOOTH

to turn on the

Bluetooth function.





Press FM MONO

, DISPLAY

and

TUNE

 

at the same time.

"BT RESET" appears on the display.



Press ENTER

to reset and clear the

paired device information.

When the paired device information is cleared,

"COMPLETE" appears on the display.

To cancel this reset operation, press FM MONO



, DISPLAY



and TUNE 



again before

pressing ENTER





repeatedly to





until the





repeatedly to

 

 

to select





until

 

 

to select the

