Sony ZS-H10CP Інструкція з експлуатації - Сторінка 2
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Стереосистема Sony ZS-H10CP. Sony ZS-H10CP 2 сторінки. Personal audio system
Також для Sony ZS-H10CP: Технічні характеристики (2 сторінок), Інструкція з експлуатації Посібник з експлуатації (11 сторінок)
Друкувати сторінку
Other Operations
Using the display
Playing tracks/MP3 files in
random order
You can check information about the CD using the
display.
You can play tracks/MP3 files in random order. When
playing an MP3 disc, you can also play MP3 files in a
Checking information of an audio CD
selected folder in random order (Folder Shuffle Play).
1
Press
To check the total track number and playing
time of the CD
2
Press MODE
Press
while the CD is stopped, and you can check
display.
them in the display.
When you select Folder Shuffle Play (MP3 disc
only), press MODE
appear in the display. Then press TUNE/FOLDER +
or – to select a folder you want.
3
Press
Total track number
To cancel Shuffle Play
Total playing time
Stop play first. Then press MODE
disappears from the display.
Checking information of an MP3 disc
Tips
• During Shuffle Play, you cannot select the previous track/MP3 file
To check the total folder number and total
by pressing
file number on the CD
• The resume function does not work during Shuffle Play.
Press
while the CD is stopped, and you can check
them in the display.
Creating your own program
Total file
number
(Program Play)
You can arrange the playing order of up to 15 tracks/
Total folder
MP3 files on a CD.
number
1
Press
2
Press MODE
To check file information
display.
Press DSPL/ENTER
while playing an MP3 disc. The
3
Press
display changes as follows:
for the tracks you want to program in the
The current file number and playing time
order you want.
For MP3 files, press TUNE/FOLDER + or – first
The song title and artist name
and then press
.
The album name*
Audio CD
*If there is no folder, "ROOT" appears.
Programmed track
Playing tracks/MP3 files
repeatedly
(Repeat Play)
MP3 disc
You can play tracks/MP3 files repeatedly in normal,
shuffle or program play modes.
1
Press
when the unit is not in CD mode.
Programmed file
2
Proceed as follows:
To repeat
Do this
4
1 Press REPEAT until "
Press
A single
1"
track/MP3
appears.
To cancel Program Play
file
2 Press
or
to select the
Stop play first. Then press MODE
track/MP3 file that you want to repeat.
disappears from the display.
3 Press
.
1 Press REPEAT until " " appears.
All tracks/
To check the order of tracks/MP3 files
MP3 files on
2 Press
.
before play
the CD
Press DSPL/ENTER
A selected
1 Press MODE
to display "FLDR"
Every time you press the button, the track/MP3 file
and then press REPEAT until " "
folder (MP3
number appears in the programmed order.
disc only)
appears.
2 Select the folder by pressing
To change the current program
TUNE/FOLDER + or – .
Press
3 Press
.
CD is playing. The current program will be erased.
Tracks/MP3
1 Start Shuffle Play (see "Playing tracks/
Then create a new program following the programing
files in
MP3 files in random order").
procedure.
2 Press REPEAT until "SHUF" and
random order
Tips
" " appear.
• If you try to program 16 tracks/MP3 files or more, "FULL" will
3 Press
.
appear in the display.
Files in a
1 Start Folder Shuffle Play (see "Playing
• You can play the same program again, since the program is saved
until you open the CD compartment.
selected
tracks/MP3 files in random order").
• The resume function does not work during Program Play.
2 Press REPEAT until "FLDR",
folder in
random order
"SHUF" and " " appear.
(MP3 disc
3 Press
.
only)
Programmed
1 Program tracks/MP3 files (see
tracks/MP3
"Creating your own program").
files
2 Press REPEAT
until " " and
"PGM" appear.
3 Press
.
To cancel Repeat Play
Press REPEAT
until " " disappears from the
display.
Presetting radio stations
(Shuffle Play)
You can store radio stations into the unit's memory. You
can preset up to 30 radio stations, 20 for FM and 10 for
AM in any order.
1
Press RADIO•BAND•AUTO PRESET
select the band.
when the unit is not in CD mode.
2
Hold down RADIO•BAND•AUTO PRESET
until "SHUF" appears in the
2 seconds until "AUTO" flashes in the display.
3
Press DSPL/ENTER
The stations are stored in memory from the lower
until "FLDR" and "SHUF"
frequencies to the higher ones.
If a station cannot be preset automatically
to start Shuffle Play.
You need to preset a station with a weak signal
manually.
1
Press RADIO•BAND•AUTO PRESET
until "SHUF"
select the band.
2
Tune in the station you want.
3
Hold down DSPL/ENTER
.
the preset number flashes in the display.
4
Press PRESET + or –
you want for the station flashes in the display.
5
Press DSPL/ENTER
The new station replaces the old one.
Tip
The preset radio stations remain in memory even if you unplug the
AC power adaptor or remove the batteries.
when the unit is not in CD mode.
until "PGM" appears in the
Playing preset radio stations
1
or
then press DSPL/ENTER
Press RADIO•BAND•AUTO PRESET
select the band.
2
Press PRESET + or –
station.
or
and DSPL/ENTER
Connecting an optional
component
number
You can enjoy the sound from a PC, TV, VCR, portable
digital music player, etc. through the speakers of this
Playing order
unit.
Be sure to turn off the power of each component before
making any connections.
For details, refer to the instruction manual of the
component to be connected.
1
Connect AUDIO IN to the line output jack
number
of the portable digital music player or other
Playing order
components using an audio connecting cable*
(not supplied).
* For a PC: use a cable which fills the connector of your PC.
to start Program Play.
For a TV or VCR: use a cable with a stereo-mini plug on one
end and two phono plugs on the other end.
For a portable digital music player: use a cable with a stereo-
until "PGM"
mini plug on both ends.
2
Turn the unit and the connected component on.
3
Press AUDIO IN and start playing sound on
the connected component.
.
The sound from the connected component is output
from the speakers.
Note
Connect the cables securely to avoid any malfunction.
once if the CD is stopped and twice if the
Precautions
Discs that this unit CAN play
• Audio CD
• CD-R/CD-RW (CD-DA*/MP3 files)
* CD-DA is the abbreviation for Compact Disc Digital Audio. It is a
recording standard used for Audio CDs.
Discs that this unit CANNOT play
to
• CD-R/CD-RW other than those recorded in music CD
format or MP3 format conforming to ISO9660 Level
for
1/Level 2 or Joliet
• CD-R/CD-RW of poor recording quality, CD-R/CD-RW
.
that has scratches or is dirty, or CD-R/CD-RW recorded
with an incompatible recording device
• CD-R/CD-RW which was finalized incorrectly
Notes on discs
• Before playing, clean the CD with a cleaning cloth.
Wipe the CD from the center out. If there is a scratch,
dirt or fingerprints on the CD, it may cause tracking
to
error.
for 2 seconds until
until the preset number
.
• Do not use solvents such as benzine, thinner,
commercially available cleaners or anti-static spray
intended for vinyl LPs.
• Do not expose the CD to direct sunlight or heat sources
such as hot air ducts, nor leave it in a car parked in
direct sunlight as there can be a considerable rise in
temperature inside the car.
• Do not stick paper or sticker on the CD, nor scratch the
surface of the CD.
• After playing, store the CD in its case.
to
On safety
• As the laser beam used in the CD player section is
to tune in the stored
harmful to the eyes, do not attempt to disassemble the
casing. Refer servicing to qualified personnel only.
• Should any solid object or liquid fall into the unit,
unplug the unit, and have it checked by qualified
personnel before operating it any further.
• Discs with non-standard shapes (e.g., heart, square,
star) cannot be played on this unit. Attempting to do so
may damage the unit. Do not use such discs.
• When inserting a CD, make sure to close the CD
compartment until it clicks. If not, the CD might pop
out.
On power sources
• For AC operation, use the supplied AC power adaptor;
do not use any other type.
• The unit is not disconnected from the AC power source
(mains) as long as it is connected to the wall outlet,
even if the unit itself has been turned off.
• Unplug the unit from the wall outlet when it is not be
used for an extended period of time.
• When the batteries are not to be used, remove them to
avoid damage that can be caused by battery leakage or
corrosion.
• The nameplate indicating operating voltage, etc. is
located at the bottom.
On placement
• Do not leave the unit in a location near heat sources,
in a place subject to direct sunlight, excessive dust or
mechanical shock or in a car subject to the direct rays
of the sun.
• Do not place the unit on an inclined or unstable place.
• Since a strong magnet is used for the speakers, keep
personal credit cards using magnetic coding or spring-
wound watches away from the unit to prevent possible
damage from the magnet.
• Do not place any objects on top of the handle on this
unit.
Do not immerse in water
This product is not meant to be immersed in water or
come in continuous contact with water.
• Before opening or shutting the CD compartment or
battery compartment lid, be sure to wipe off water,
dust or sand on the outside of the unit.
• Water in the headphones jack/DC IN 9V jack/
AUDIO IN jack may cause rusting. Cover the jacks
with the attached rubber cap when the jacks are not
used.
• If the unit is splashed with salt water, wipe clean with a
damp cloth, then dry with a soft dry cloth. Do not wash
under running water; do not use soap or detergent; do
not dry with an electric hair dryer.
• The supplied AC power adaptor is not water resistant.
To prevent shock hazard, avoid using the unit near
water during AC operation.
• The storage space on the back of this unit is not
waterproof. Do not use it to store anything that can be
damaged by water.
On operation
• If the unit is brought directly from a cold to a warm
location, or is placed in a very damp room, moisture
may condense on the lens inside the CD player section.
Should this occur, the unit will not operate properly.
In this case, remove the CD and wait about an hour for
the moisture to evaporate.
Cleaning the cabinet
• Clean the cabinet, panel and controls with a soft cloth
slightly moistened with a mild detergent solution. Do
not use any type of abrasive pad, scouring powder, or
solvent, such as alcohol or benzine.
If you have any questions or problems concerning your unit, please
consult your nearest Sony dealer.
Troubleshooting
General
The power is not on.
• Connect the AC power adaptor to the wall outlet
securely.
• Make sure the batteries are inserted correctly.
• Replace all the batteries with new ones if they are
weak.
There is no audio.
• Unplug the headphones when listening through
speakers.
Noise is heard.
• Someone is using a portable telephone or other
equipment that emits radio waves near the unit.
Move the portable telephone, etc., away from the unit.
CD/MP3 player
The CD does not play or "NO DISC" is
displayed even when a CD is in place.
• Place the CD with the label surface up.
• Clean the CD.
• Take out the CD and leave the CD compartment open
for about an hour to dry moisture condensation.
• The CD-R/CD-RW is blank.
• There is a problem with the quality of the CD-R/
CD-RW, recording device or application software.
• Replace all the batteries with new ones if they are
weak.
The sound drops out.
• Reduce the volume.
• Clean the CD, or replace it if the CD is badly
damaged.
• Place the unit in a location free from vibration.
• Clean the lens with a commercially available blower.
• The sound may drop out or noise may be heard when
using poor quality CD-R/CD-RW or if there is a
problem with the recording device or application
software.
Starting playback takes more time than
usual.
• The following discs take a longer time to start
playback.
– a disc recorded with a complicated tree structure.
– a disc that has not been finalized (a disc to which
data can be added).
– a disc that has many folders or non-MP3 files.
Radio
Reception is poor.
• Reorient the antenna to improve FM reception.
• Reorient the unit itself to improve AM reception.
The audio is weak or has poor quality.
• Replace all the batteries with new ones if they are
weak.
• Move the unit away from the TV.
The picture of your TV becomes unstable.
• If you are listening to an FM program near the TV with
an indoor antenna, move the unit away from the TV.
After trying the remedies, if you still have problems,
unplug the AC power adaptor or remove all the batteries.
After all the indications in the display disappear, plug
the AC power adaptor or insert the batteries again. If
the problem persists, please consult your nearest Sony
dealer.