Argo 6x6 Conquest Посібник з експлуатації - Сторінка 9
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Позашляховик Argo 6x6 Conquest. Argo 6x6 Conquest 16 сторінок. Ducting & exhaust
Друкувати сторінку
Ducting & Exhaust
2.
Disconnect the 2 extension springs connecting the tailpipe to the muffler and remove
the tailpipe. Photo DE-22
3.
Unfasten the muffler at the engine and remove.
Installing the Muffler (Conquest Models )
1.
Install the muffler to the engine exhaust manifold and torque to specifications.
New exhaust gaskets are recommended when ever servicing the muffler system.
2.
Install the tailpipe/spark arrestor to the muffler, connecting with 2 extension springs.
3.
Install the heat shield over the muffler, securing with 4 fasteners. Refer to the illus-
trated parts manual for correct hardware and orientation.
Removing the Muffler (Response, Vanguard2 & Vanguard Models)
1.
Remove the exhaust duct cover.
On 6x6 Vanguards manufactured prior to S8131:
i.
Remove the 3 fasteners securing the exhaust duct cover and remove the cover. This
exhaust shroud system utilizes a duct below the muffler. See the appropriate illus-
trated parts manual for component structure on these earlier models.
On vehicles manufactured from S8131, SN8138, RB12075 and prior to S13434,
N13436, R19647:
i.
Remove the 3 fasteners that secure the exhaust duct cover and remove the cover.
Photo DE-23
On vehicles manufactured from S13434, N13436, and R19647:
i
Remove the 4 fasteners that secure the exhaust duct cover and remove the cover.
Ontario Drive & Gear Limited
PH.(519)- 662-2840 FAX (519)- 662-2421
DE-21
IMPORT T T T T ANT
IMPOR
IMPOR
ANT
ANT
IMPOR
IMPOR
ANT
ANT
DE-8
Argo Service Manual
DE-22
www.odg.com