Cisco ASA 5545-X Посібник з програмного забезпечення - Сторінка 28

Переглянути онлайн або завантажити pdf Посібник з програмного забезпечення для Мережеве обладнання Cisco ASA 5545-X. Cisco ASA 5545-X 37 сторінок. Threat defense reimage guide
Також для Cisco ASA 5545-X: Інструкція з монтажу Посібник з монтажу (13 сторінок), Посібник із швидкого старту (13 сторінок), Посібник із швидкого старту (15 сторінок)

Reimage the Firepower Threat Defense Device

CAUTION:

You have selected IPv6 stateless autoconfiguration, which assigns a global address

based on network prefix and a device identifier. Although this address is unlikely

to change, if it does change, the system will stop functioning correctly.

We suggest you use static addressing instead.

Apply the changes?(y,n) [Y]: y

Configuration saved successfully!

Applying...

Restarting network services...

Done.

Press ENTER to continue...

firepower-boot>

Step 8

Download the Firepower Threat Defense system software install package. This step shows an HTTP installation.

system install [noconfirm] url

Include the noconfirm option if you do not want to respond to confirmation messages.

Example:

> system install noconfirm http://10.86.118.21/ftd-6.0.1-949.pkg

You are prompted to erase the internal flash drive. Enter y.

######################## WARNING ############################

# The content of disk0: will be erased during installation! #

#############################################################

Do you want to continue? [y/N] y

The installation process erases the flash drive and downloads the system image. You are prompted to continue

with the installation. Enter y.

Erasing disk0 ...

Verifying

Downloading

Extracting

Package Detail

Description: Cisco ASA-NGFW 6.3.0 System Install

Requires reboot: Yes

Do you want to continue with upgrade? [y]: y

When the installation finishes, press Enter to reboot the device.

Warning: Please do not interrupt the process or turn off the system.

Doing so might leave system in unusable state.

Starting upgrade process ...

Populating new system image

Reboot is required to complete the upgrade. Press 'Enter' to reboot the system.

The reboot takes upwards of 30 minutes, and could take much longer. Upon reboot, you will be in the Firepower

Threat Defense CLI.

Cisco ASA and Firepower Threat Defense Reimage Guide