Cisco ASA 5545-X Посібник з програмного забезпечення - Сторінка 35
Переглянути онлайн або завантажити pdf Посібник з програмного забезпечення для Мережеве обладнання Cisco ASA 5545-X. Cisco ASA 5545-X 37 сторінок. Threat defense reimage guide
Також для Cisco ASA 5545-X: Інструкція з монтажу Посібник з монтажу (13 сторінок), Посібник із швидкого старту (13 сторінок), Посібник із швидкого старту (15 сторінок)
Друкувати сторінку
Cisco ASA and Firepower Threat Defense Reimage Guide
Reimage the Firepower 2100 to ASA or Firepower Threat Defense
firepower>
firepower# connect ftd
You must accept the EULA to continue.
Press <ENTER> to display the EULA:
[...]
System initialization in progress.
Please stand by.
You must change the password for 'admin' to continue.
Enter new password:
Confirm new password:
You must configure the network to continue.
You must configure at least one of IPv4 or IPv6.
Do you want to configure IPv4? (y/n) [y]:
Do you want to configure IPv6? (y/n) [n]:
Configure IPv4 via DHCP or manually? (dhcp/manual) [manual]:
Enter an IPv4 address for the management interface [192.168.45.45]: 192.168.0.174
Enter an IPv4 netmask for the management interface [255.255.255.0]:
Enter the IPv4 default gateway for the management interface [data-interfaces]: 192.168.0.254
Enter a fully qualified hostname for this system [firepower]:
Enter a comma-separated list of DNS servers or 'none' []: none
Enter a comma-separated list of search domains or 'none' []: none
If your networking information has changed, you will need to reconnect.
No DNS servers specified to configure.
No domain name specified to configure.
Setting hostname as firepower
DHCP Server Disabled
Setting static IPv4: 192.168.0.174 netmask: 255.255.255.0 gateway: 192.168.0.254 on
management0
Updating routing tables, please wait...
All configurations applied to the system. Took 6 Seconds.
Saving a copy of running network configuration to local disk.
For HTTP Proxy configuration, run 'configure network http-proxy'
Manage the device locally? (yes/no) [yes]:
Configuring firewall mode to routed
Update policy deployment information
- add device configuration
Successfully performed firstboot initial configuration steps for Firepower Device Manager
for Firepower Threat Defense.
>
ASA Example: Console
[...]
Cisco FPR Series Security Appliance
firepower-2140 login: admin
Password:
Successful login attempts for user 'admin' : 1
Cisco Firepower Extensible Operating System (FX-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2009-2018, Cisco Systems, Inc. All rights reserved.
[...]
User enable_1 logged in to ciscoasa
Logins over the last 1 days: 1.
Failed logins since the last login: 0.
[press Enter to see the prompt below:]
Cisco ASA and Firepower Threat Defense Reimage Guide
35