Cisco ASA 5580 Посібник із швидкого старту - Сторінка 29
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Мережеве обладнання Cisco ASA 5580. Cisco ASA 5580 40 сторінок. Asa 5500 series adaptive security appliance
Також для Cisco ASA 5580: Посібник із швидкого старту (13 сторінок)
Друкувати сторінку
Chapter 5
Installing the ASA 5585-X
Step 2
Step 3
Step 4
Connecting Interface Cables and Verifying Interface
Connectivity
Step 1
78-19753-01
1
Cisco ASA 1200W AC
100-240V
15.0/8.0.A
56/60Hz
Power Supply Module (PS0)
1
Connect the power cables to the electrical outlets.
Power on the ASA. If you have redundant power supplies, you must power on both
modules.
Check the Power LED on the front of the ASA; the AC ON indicator should be
green, the FAN ON indicator should be green, and the OUT OK indicator should
be off.
Connect a management PC to the core SSP Management 0/0 interface for use with
the Adaptive Security Device Manager (ASDM).You can connect it directly with
an Ethernet cable, or connect the PC and the ASA to the same management
network.
The ASA 5585-X has 2 management interfaces (Management 0/0 and
Note
Management 0/1); however, only Management 0/0 is configured for use.
Connecting Interface Cables and Verifying Interface Connectivity
Power Supply Module (PS1)
2
Cisco ASA 5580 Series Quick Start Guide
2
Cisco ASA 1200W AC
100-240V
15.0/8.0.A
56/60Hz
5-3