Digitimer D188 Посібник оператора - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник оператора для Лабораторне обладнання Digitimer D188. Digitimer D188 20 сторінок. Remote electrode selector

Друкувати сторінку
Digitimer Ltd – D188 Operator's Manual

D188 Digital Input Socket

The D188 is fitted with a 15-way female "D" connector which is used for digital control. Digitimer
supplies a cable with the unit which has 10 tinned wires for user connection to a digital output device
fitted with screw terminals. The wiring details for the socket and cable are given below.
Pin
1
2
3
4
5
Note that pins 11 to 15 are unused. A +5V pin is made available for anyone wishing to use this for button
control of the D188 and is not needed for digital control.

Installing the D188 Control Software

The D188 Control Software is supplied on a USB flash drive and is compatible with personal computers
running Microsoft Windows 7 or higher.
1.
Insert the USB stick and browse to the contents.
2. Double click on the D188 software installer file (*.exe) and follow in the installation prompts to
completion.

Installing the D188 Remote Electrode Selector Hardware

Once the software has been installed on the host PC, the D188 can be connected to the computer.
1. Connect the supplied USB cable between the D188 and a free USB port on the host PC.
Function (Colour)
D0 (Black)
D1 Brown
D2 (Red)
D3 (Orange)
D4 (Yellow)
10
Pin
Function (Colour)
6
D5 (Green)
7
D6 (Blue)
8
D7 (Violet)
9
+5V (White)
10
GND/Cable Screen
(Grey/Black)
Version 1.2