Digitimer D400 Посібник оператора - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник оператора для Обладнання для запису Digitimer D400. Digitimer D400 20 сторінок. Multi-channel 50/60hz mains noise eliminator, two/four channel
Друкувати сторінку
Digitimer Ltd – D400 Operator's Manual
2 or 4 Channel Output Lead (male DB9 to multiple BNC): D990-33 (for D400-2) D990-
35 (for D400-4).
Optional Accessories
The following items are optional purchases available from Digitimer or our local
representatives.
D990-17 8 Channel Signal Link Cable (for use with Digitimer D360, D360R, D440-2 or
D440-4 amplifiers).
NL951B-1m or NL951B-2m 1m/2m Lemo to BNC cable.
D185-TC3 BNC to BNC cable (1m)
D185-TC3-2M BNC to BNC cable (2m)
Precautions and Warnings
Operator's Manual
Carefully study this Operator's Manual before using the D400 Multi-channel Noise
Eliminator.
Explosion and Fire
The D400 must not be used in an explosive or volatile atmosphere.
Damage
The D400 and/or any accessories must not be used if there are any signs of external
damage.
Moisture
The D400 and/or any accessories must not be used if any parts are wet or damp.
Electrical Interference
This unit has been fully tested for European (CE) EMC conformity. This unit should NOT be
used near radio transmitters. If any 'strange' behaviour of the unit is noted, discontinue use
immediately and refer to a qualified EMC engineer.
8
Version 1.2