Digitimer NeuroLog NL405 Width/Delay Посібник користувача - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник користувача для Генератор імпульсів Digitimer NeuroLog NL405 Width/Delay. Digitimer NeuroLog NL405 Width/Delay 5 сторінок.
Друкувати сторінкуUsers Manual
Delayed Output Pulse Duration Jumpers (on-board)
Component View of PCB
Delayed Output Pulse Duration Selection
Jumpers
The Duration of the pulse at "DELAYED OUT" can be set to one of six (6) pulse durations and is set by two
jumpers on the PCB.
These are altered by pulling them off their pins, moving them to where is required and pushing them back on.
Both jumpers MUST be fitted in one of the six configurations shown below.
We reserve the right to alter specifications and price without prior notification.
First Issued: December 19, 2002
File Reference: N:\Docs\Company\Manuals\NeuroLog \ NL405-02.lwp
Digitimer Ltd
E-mail: [email protected]
NeuroLog™ System
NL405
Setting
0.5 µs
1.5 µs
5 µs
Last Revision: March 26, 2003
Page 5 of 5
Tel:+44 (0)1707 328347; Fax:...373153
"Delayed Output" Pulse Duration
Jumpers
Setting
50 µs
150 µs
500 µs
Printed: March 26, 2003
Copyright © 2003
Website: www.digitimer.com
NL405