Cisco ASR 9910 Посібник
Переглянути онлайн або завантажити pdf Посібник для Мережеве обладнання Cisco ASR 9910. Cisco ASR 9910 44 сторінки. Replacing cisco asr 9000 series router components
Друкувати сторінку- 1. Field Replaceable Units
- 2. Online Insertion and Removal
- 3. Powering off the Router
- 4. Replacing the Chassis Air Filter
- 5. Required Tools and Equipment
- 6. Removing a Fan Tray
- 7. Installing a Fan Tray
- 8. Disconnecting AC Power
- 9. Reconnecting AC Power
- 10. Disconnecting DC Power
- 11. Reconnecting DC Power
Replacing Cisco ASR 9000 Series Router
Components
The router is equipped as ordered and is ready for installation and startup when it is shipped. As network
requirements change, you may need to upgrade the system by adding or changing components. This chapter
describes how to maintain router components.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Prerequisites and Preparation
Before you perform any of the procedures in this chapter, be sure that you:
• Review the b-asr9k-hardware-installation-guide_chapter1.pdf#nameddest=unique_8.
• Read the safety and ESD-prevention guidelines described in
• Ensure that you have all the necessary tools and equipment before beginning the procedure.
Have access to the safety and compliance document during the installation, see:
http://www.cisco.com/en/US/docs/routers/asr9000/hardware/rcsi/regulatory/compliance/asr9krcsi.html
Prerequisites and Preparation, on page 1
Replacing the Chassis Air Filter, on page 4
Removing and Replacing the Fan Trays, on page 10
Removing and Replacing Power System Components, on page 12
Removing and Replacing Cards from the Chassis, on page 25
Migrating from RP1 to RP2 Card, on page 27
Migrating from RP2 to RP3 Card, on page 30
Migrating from RSP440 to RSP880 or RSP880-LT Card , on page 33
Migrating from RSP4-S to RSP880-LT Card (ASR 9906 Router), on page 36
Migrating from RSP4/RSP4-S/RSP-L to RSP5 Card, on page 38
Migrating from FC1 to FC2 Card, on page 41
Migrating from A99-SFC2 to A99-SFC3 Card, on page 41
Migrating from A99-SFC-S/A99-SFC-T to A99-SFC3-S/A99-SFC3-T Card, on page 42
Removing a Chassis from the Equipment Rack, on page 43
Installing a Replacement Chassis in the Equipment Rack, on page 44
Packing a Chassis for Shipment, on page 44
chapter1.pdf#nameddest=unique_10.
b-asr9k-hardware-installation-guide_
Replacing Cisco ASR 9000 Series Router Components
1