ACU-RITE 01190 Інструкція з експлуатації - Сторінка 3

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Аксесуари ACU-RITE 01190. ACU-RITE 01190 4 сторінки. Water detector

Друкувати сторінку

Features & Benefits

Receiver Setup

Remove the battery compartment cover.

Set the A-B-C switch located inside the

battery compartment.

You must select the same letter choices for

both the detector and the receiver in order

for the units to synchronize.

Troubleshooting

Problem

Alarm does not sound,

even when there is

liquid

No Wireless Receiver

reception

Water Detector Wireless Receiver

4 5 6 7

• Check that the batteries are installed correctly. Batteries may

need to be replaced.

• Make sure the Alarm ON/OFF switch on the Water Detector

is set to ON.

If the wireless signal indicator does not flash:

• Relocate the Wireless Receiver and/or the Water Detector.

The units must be within 100 m (330 ft) of each other.

• Make sure the A-B-C switches on both units match.

Instruction Manual

model 01191

FRONT

1. Moisture Indicator

Indicates when moisture

is detected.

2. Low Battery Indicator

3. Zz Button

Press and release to silence the

alarm for 1 hour. Press and hold

4 seconds to silence the alarm

for 24 hours.

BACK

4. Magnetic Backing

5. A-B-C Switch

ID code that must match

Water Detector's A-B-C switch

to ensure units synchronize.

6. Integrated Hanger

For easy placement.

7. Battery Compartment

8. Battery Compartment Cover

Insert 3 x AA batteries into the battery

compartment for the Receiver, as shown.

Follow the polarity (+/-) diagram in the

battery compartment.

Replace the battery cover.

Possible Solution

(sold separately)