Cisco Catalyst 3750-E Series Посібник для початківців - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник для початківців для Мережеве обладнання Cisco Catalyst 3750-E Series. Cisco Catalyst 3750-E Series 27 сторінок. Switches and power supply modules
Також для Cisco Catalyst 3750-E Series: Посібник для початківців (33 сторінок), Бюлетень підтримки продукту (6 сторінок), Бюлетень підтримки продукту (5 сторінок), Бюлетень підтримки продукту (6 сторінок), Вказівки щодо встановлення (20 сторінок)

Cisco Catalyst 3750-E Series Посібник для початківців
1

About this Guide

This guide provides instructions on how to use Express Setup to initially configure your Catalyst
switch. Also covered are switch management options, basic rack-mounting procedures, stacking
procedures, port and module connection procedures, and troubleshooting help.
For additional installation and configuration information for Catalyst 3750-E switches, see the
Catalyst 3750-E documentation on Cisco.com. For system requirements, important notes, limitations,
open and resolved bugs, and last-minute documentation updates, see the release notes, also on
Cisco.com.
When using the online publications, refer to the documents that match the Cisco IOS software version
running on the switch. The software version is on the Cisco IOS label on the switch rear panel.
For translations of the warnings that appear in this publication, see the Regulatory Compliance and
Safety Information for the Catalyst 3750-E and Catalyst 3560-E Switch that accompanies this guide.
2

Taking Out What You Need

Follow these steps:
1. Unpack and remove the switch and the accessory kit from the shipping box.
2. Return the packing material to the shipping container, and save it for future use.
3. Verify that you have received the items shown on page 3. If any item is missing or damaged,
contact your Cisco representative or reseller for instructions. Some switch models might include
additional items that are not shown on page 3.
4. For switches with the optional 1150-W power supply module (model C3K-PWR-1150WAC),
install the power supply in the switch as described in the installation notes after you rack-mount
the switch.
2