Cisco Catalyst 7500 Series Посібник з конфігурації - Сторінка 35

Переглянути онлайн або завантажити pdf Посібник з конфігурації для Мережеве обладнання Cisco Catalyst 7500 Series. Cisco Catalyst 7500 Series 50 сторінок. Chassis interface board
Також для Cisco Catalyst 7500 Series: Технічний паспорт (11 сторінок), Посібник з усунення несправностей (11 сторінок), Посібник із заміни (40 сторінок)

Spectralink VIEW Certified Configuration Guide: Cisco Controllers and APs

DFS Channels

If DFS channels are used in the deployed network, in the navigation pane under 802.11a/n,

select DFS (802.11h). Check the Channel Announcement radio box to cause the AP to

advertise Spectrum Management. If the AP does not advertise Spectrum Management,

Spectralink handsets will not connect on DFS channels (bandwidth shared with radar facilities).

Media (Voice/Video)

For 84-Series handsets Admission Control (ACM) must be enabled on both the Voice and Video

AC when the handset is configured for Admission Control Mandatory. PIVOT handsets support

Admission Control on version 1.5 and later.

To enable Admission Control (ACM):

In the navigation pane underneath 802.11 a/n, select Media, then select the Voice tab.

Select the Admission Control (ACM) checkbox. If CAC Method is available, select

Static from the drop down list. Set the Max RF Bandwidth to 55 to limit the bandwidth

allocated to handsets to a value tested to provide good performance. If available,

ensure that the Reserved Roaming Bandwidth is set to 6%.

721-1001-000-AH.docx

December 2016